Skip to content

No response for live video #11

Closed
Closed

Description

@RaymondMouthaan

First of all, thanks for this great peace of software!

I have flashed raspbian-stretch-lite-2019-04-08-hkcam-v0.0.6-armv6.img and all seemed to work fine for less than a day, but after that Live shows "No Response" as shown below. Still image remains to work.

Rebooting the Raspberry PI zero w fixes the issue, but comes back in within a day.

IMG_1410

IMG_1411

Activity

  1. brutella commented on May 29, 2019

    @brutella
    Owner

    Could you please paste the content of the log file?
    You can find instructions on how to access it in the wiki.

  2. RaymondMouthaan commented on May 29, 2019

    @RaymondMouthaan
    Author

    Hi Matthias,

    I've attached all the log files from /var/log/hkcam because in current I couldn't find anything suspicious. Hope these files help you.

    At this very moment hkcam works fine, since I rebooted the PI zero this morning.

    hkcam.zip

  3. brutella commented on May 29, 2019

    @brutella
    Owner

    Thank for the log files. I think I've found the bug.

    Please verify that the fix works by compiling hkcam yourself from the fix-ip-search branch.

    You can do that with the following.

    1. Make sure that Git and Go are installed.
    2. Clone the project with git clone https://github.com/brutella/hkcam.git
    3. Fetch all branches with git fetch --all
    4. Checkout the fix-ip-search branch with git checkout fix-ip-search
    5. Change directory into the project with cd hkcam
    6. Build hkcam with make build
    7. Copy the new binary onto the raspberry pi with scp build/hkcam-_linux_armhf/usr/bin/hkcam pi@raspberrypi.local:~
    8. SSH into the raspberry pi with ssh pi@raspberrypi.local (password raspberry)
    9. Stop the currently running daemon with sudo sv stop hkcam
    10. Override the old binary with the new one sudo mv ~/hkcam /usr/bin/
    11. Restart hkcam with sudo sv start hkcam
  4. RaymondMouthaan commented on May 29, 2019

    @RaymondMouthaan
    Author

    @brutella, great hope it works ..

    Can I do step 1 - 6 on a MAC ?

    Let you know the results

  5. iMartzen commented on May 29, 2019

    @iMartzen

    I experience the same problems. I will also try this solution. Fingers crossed. I worked for me! I am now able to stream LIVE.

  6. RaymondMouthaan commented on May 29, 2019

    @RaymondMouthaan
    Author

    Like @iMartzen, I followed the steps and hkcam seems to work, lets wait a couple of days to see if it remains to work 👍

  7. brutella commented on May 29, 2019

    @brutella
    Owner

    Thanks all.
    I will release a new image tomorrow if this fixes the issue.

  8. RaymondMouthaan commented on May 29, 2019

    @RaymondMouthaan
    Author

    @brutella, thank you for fixing it so quickly!

    I'll keep you updated if tomorrow still runs fine and then you will see an order for enclosures as well! 😇

  9. baseship commented on May 30, 2019

    @baseship

    Back from Nightwork now... followed the steps below - now the stream works!

  10. iMartzen commented on May 30, 2019

    @iMartzen

    My watch cannot receive a LIVE video. It stays in "Connecting" modi.
    Does anyone experience this too?

    PHOTO-2019-05-30-12-55-50

  11. RaymondMouthaan commented on May 30, 2019

    @RaymondMouthaan
    Author

    @brutella, unfortunately same problem re-occurs (after approx. 18 hours)... please find attached the log file.

    current.log

  12. brutella commented on May 30, 2019

    @brutella
    Owner

    hkcam v0.0.7 fixes this issue.

  13. RaymondMouthaan commented on May 30, 2019

    @RaymondMouthaan
    Author

    @brutella if 0.0.7 is the same as branch fix-ip-search from yesterday, I am afraid the issue remains ...

  14. brutella commented on May 30, 2019

    @brutella
    Owner

    This issue is further discussed in #15

  15. RaymondMouthaan commented on May 31, 2019

    @RaymondMouthaan
    Author

    @brutella, thank you for fixing it so quickly!

    I'll keep you updated if tomorrow still runs fine and then you will see an order for enclosures as well! 😇

    @brutella, just curious, did you receive my order?

  16. iMartzen commented on May 31, 2019

    @iMartzen

    I agree; thank you for fixing so quickly!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions

      ⌂ 换网址