esp8266 wifi-serial bridge, outbound TCP, and arduino/AVR/LPC/NXP programmer
-
Updated
Jul 18, 2021 - C
esp8266 wifi-serial bridge, outbound TCP, and arduino/AVR/LPC/NXP programmer
Stream server (serial-to-wifi bridge) for ESPHome
A network <=> ESP32 <=> USB (FTDI) <=> 3D printer Bridge
ESPHome UART-over-TCP components and transparent UART bridging.
Allows a raspberry pi zero w to act as a Serial to Bluetooth bridge connecting a Bluetooth enabled computer or phone to a serial device, such as a switch, router, or other appliance that supports serial communication.
Bridge TCP, UDP, SSL, and WebSocket clients over Serial. Supports WiFi hosts (ESP32/ESP8266) or PC/Raspberry Pi via Python/USB.
A 6-port USB-to-UART bridge for Raspberry Pi Pico and Pico 2, built for embedded bring-up, test fixtures, automation, and multi-device debugging.
mqtt proxy for non-connected microcontroller, request response bridge to serial
UART over Ethernet using a W5100 Ethernet Shield and an Arduino Mega.
Secure Super Cereal Tap ESP: A lightweight ESP32 firmware to bridge UART devices over TCP with TLS/mTLS support.
WiFi-to-serial bridge for ESP32-S3 that speaks Megasquirt's msEnvelope protocol natively. Connects TunerStudio to Speeduino/Megasquirt ECUs over WiFi out of the box.
USB to UART breakout board based on the CY7C65213 for reliable serial communication over USB.
ESPHome bridge for 125 kHz EM4100 RFID readers with RS-232 ASCII output (Pegasus PP-30 and alike): EM4100 checksum + debounce on an ESP32, MQTT over TLS, buzzer/LED answer at the door (arm/disarm/denied), tested openHAB example. Never decides - your home automation does.
High-performance USB-to-UART bridge using RP2040-Zero with RGB Neopixel indicator and ESP32 auto-reset. Tested for ZTE B860H V5 STB.
Simple commandline tool to upload to uno wifi boards
Serial port bridge utility project.
Router serial consoles over Wi-Fi on an ESP32-S3 — TCP bridge with PSRAM scrollback replayed on connect, and every boot mirrored to flash so a power cycle never costs you the log.
RFC2217 serial bridge for flashing Nordic nRF boards from Linux containers via a macOS host.
Wireless ESP32-S3 USB and RS232 serial bridge with WiFi, BLE, web terminal, and OTA updates
To associate your repository with the serial-bridge topic, visit your repo's landing page and select "manage topics."