DEV Community

#machining

Posts

đź‘‹ Sign in for the ability to sort posts by relevant, latest, or top.
A 0.5 mm Wall Doesn't Move While You Cut It: Notes From Filming a 4-Axis Aluminum Job
chxprecisionmetal profile

A 0.5 mm Wall Doesn't Move While You Cut It: Notes From Filming a 4-Axis Aluminum Job

#cnc #manufacturing #machining #aluminum
Comments
4 min read
4-Axis vs 5-Axis for Aluminum Parts: The Quote Difference Nobody Explains
chxprecisionmetal profile

4-Axis vs 5-Axis for Aluminum Parts: The Quote Difference Nobody Explains

#manufacturing #cnc #machining #engineering
Comments
3 min read
What Your 40 / 1,000 / 10,000-Piece Order Actually Tests in a Chinese 5-Axis Shop
chxprecisionmetal profile

What Your 40 / 1,000 / 10,000-Piece Order Actually Tests in a Chinese 5-Axis Shop

#manufacturing #cnc #machining #engineering
Comments 1
3 min read
Guide Bushings Explained: Why Swiss-Type Lathes Hold Tolerances on Long, Thin Parts
chxprecisionmetal profile

Guide Bushings Explained: Why Swiss-Type Lathes Hold Tolerances on Long, Thin Parts

#manufacturing #machining #cnc #engineering
Comments 1
4 min read
The Ultimate Guide to 304 Stainless Steel: Food Safety, Rust, and Daily Uses_evefab
evefab profile
EveFab

The Ultimate Guide to 304 Stainless Steel: Food Safety, Rust, and Daily Uses_evefab

#machining
Comments
3 min read
CNC Aluminum Parts: What Actually Changes Between 200 Pieces and 10,000
chxprecisionmetal profile

CNC Aluminum Parts: What Actually Changes Between 200 Pieces and 10,000

#manufacturing #cnc #machining #engineering
Comments 1
3 min read
Why the Same 0.01 mm Part Measures Differently in Two Buildings
chxprecisionmetal profile

Why the Same 0.01 mm Part Measures Differently in Two Buildings

#manufacturing #machining #metrology #cnc
Comments
6 min read
CNC Machining Time Explained: Why Your Actual Cycle Time Is Longer Than the Calculation
lilu1626 profile

CNC Machining Time Explained: Why Your Actual Cycle Time Is Longer Than the Calculation

#cnc #manufacturing #engineering #machining
Comments
14 min read
Material Removal Rate (MRR) Explained: Why Faster Feed Doesn't Always Mean Higher Productivity
lilu1626 profile

Material Removal Rate (MRR) Explained: Why Faster Feed Doesn't Always Mean Higher Productivity

#cnc #manufacturing #engineering #machining
Comments
14 min read
CNC Feed Rate Explained: Why F1000 Doesn't Always Mean the Same Thing
lilu1626 profile

CNC Feed Rate Explained: Why F1000 Doesn't Always Mean the Same Thing

#cnc #manufacturing #engineering #machining
Comments 1
12 min read
Feed per Tooth (fz) Explained: The CNC Parameter Behind Feed Rate and Chip Load
lilu1626 profile

Feed per Tooth (fz) Explained: The CNC Parameter Behind Feed Rate and Chip Load

#cnc #manufacturing #engineering #machining
Comments
12 min read
Cutting Speed Explained: What Is Vc and How Do You Select It for CNC Machining?
lilu1626 profile

Cutting Speed Explained: What Is Vc and How Do You Select It for CNC Machining?

#cnc #manufacturing #engineering #machining
Comments
9 min read
5-Axis DFM Checklist: 12 Design Decisions That Change Your Machining Quote
chxprecisionmetal profile

5-Axis DFM Checklist: 12 Design Decisions That Change Your Machining Quote

#manufacturing #cnc #design #machining
Comments
4 min read
CNC Spindle Speed Explained: Formula, Calculation & Practical Machining Guide
lilu1626 profile

CNC Spindle Speed Explained: Formula, Calculation & Practical Machining Guide

#cnc #machining #engineering #manufacturing
Comments
9 min read
CNC Prototype to Production: Bridging the 1-Piece to 100,000-Piece Gap
chxprecisionmetal profile

CNC Prototype to Production: Bridging the 1-Piece to 100,000-Piece Gap

#hardware #manufacturing #production #machining
Comments
3 min read
đź‘‹ Sign in for the ability to sort posts by relevant, latest, or top.
⌂ 换网址