View a markdown version of this page

ModifyDBCluster - Amazon Relational Database Service

ModifyDBCluster

Modifies the settings of an Amazon Aurora DB cluster or a Multi-AZ DB cluster. You can change one or more settings by specifying these parameters and the new values in the request.

To change the VPC networking configuration of an Aurora PostgreSQL DB cluster, see EnableVPCNetworking. To move an Aurora MySQL or Aurora PostgreSQL DB cluster to a different DB subnet group, in the same VPC or a different VPC, see DBSubnetGroupName.

For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.

For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide.

Request Parameters

For information about the parameters that are common to all actions, see Common Parameters.

DBClusterIdentifier

The DB cluster identifier for the cluster being modified. This parameter isn't case-sensitive.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

  • Must match the identifier of an existing DB cluster.

Type: String

Required: Yes

AllocatedStorage

The amount of storage in gibibytes (GiB) to allocate to each DB instance in the Multi-AZ DB cluster.

Valid for Cluster Type: Multi-AZ DB clusters only

Type: Integer

Required: No

AllowEngineModeChange

Specifies whether engine mode changes from serverless to provisioned are allowed.

Valid for Cluster Type: Aurora Serverless v1 DB clusters only

Constraints:

  • You must allow engine mode changes when specifying a different value for the EngineMode parameter from the DB cluster's current engine mode.

Type: Boolean

Required: No

AllowMajorVersionUpgrade

Specifies whether major version upgrades are allowed.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

  • You must allow major version upgrades when specifying a value for the EngineVersion parameter that is a different major version than the DB cluster's current version.

Type: Boolean

Required: No

ApplyImmediately

Specifies whether the modifications in this request are asynchronously applied as soon as possible, regardless of the PreferredMaintenanceWindow setting for the DB cluster. If this parameter is disabled, changes to the DB cluster are applied during the next maintenance window.

Most modifications can be applied immediately or during the next scheduled maintenance window. Some modifications, such as turning on deletion protection and changing the master password, are applied immediately—regardless of when you choose to apply them.

By default, this parameter is disabled.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: Boolean

Required: No

AutoMinorVersionUpgrade

Specifies whether minor engine upgrades are applied automatically to the DB cluster during the maintenance window. By default, minor engine upgrades are applied automatically.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters.

For more information about automatic minor version upgrades, see Automatically upgrading the minor engine version.

Type: Boolean

Required: No

AwsBackupRecoveryPointArn

The Amazon Resource Name (ARN) of the recovery point in AWS Backup.

Type: String

Length Constraints: Minimum length of 43. Maximum length of 350.

Pattern: arn:aws[a-z-]*:backup:[-a-z0-9]+:[0-9]{12}:[-a-z]+:([a-z0-9\-]+:)?[a-z][a-z0-9\-]{0,255}

Required: No

BacktrackWindow

The target backtrack window, in seconds. To disable backtracking, set this value to 0.

Valid for Cluster Type: Aurora MySQL DB clusters only

Default: 0

Constraints:

  • If specified, this value must be set to a number from 0 to 259,200 (72 hours).

Type: Long

Required: No

BackupRetentionPeriod

The number of days for which automated backups are retained. Specify a minimum value of 1.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Default: 1

Constraints:

  • Must be a value from 1 to 35.

Type: Integer

Required: No

CACertificateIdentifier

The CA certificate identifier to use for the DB cluster's server certificate.

For more information, see Using SSL/TLS to encrypt a connection to a DB instance in the Amazon RDS User Guide.

Valid for Cluster Type: Multi-AZ DB clusters

Type: String

Required: No

CloudwatchLogsExportConfiguration

The configuration setting for the log types to be enabled for export to CloudWatch Logs for a specific DB cluster.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

The following values are valid for each DB engine:

  • Aurora MySQL - audit | error | general | instance | slowquery | iam-db-auth-error

  • Aurora PostgreSQL - instance | postgresql | iam-db-auth-error

  • RDS for MySQL - error | general | slowquery | iam-db-auth-error

  • RDS for PostgreSQL - postgresql | upgrade | iam-db-auth-error

For more information about exporting CloudWatch Logs for Amazon RDS, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.

For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.

Type: CloudwatchLogsExportConfiguration object

Required: No

CopyTagsToSnapshot

Specifies whether to copy all tags from the DB cluster to snapshots of the DB cluster. The default is not to copy them.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: Boolean

Required: No

DatabaseInsightsMode

Specifies the mode of Database Insights to enable for the DB cluster.

If you change the value from standard to advanced, you must set the PerformanceInsightsEnabled parameter to true and the PerformanceInsightsRetentionPeriod parameter to 465.

If you change the value from advanced to standard, you can set the PerformanceInsightsEnabled parameter to true to collect detailed database counter and per-query metrics.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: String

Valid Values: standard | advanced

Required: No

DBClusterInstanceClass

The compute and memory capacity of each DB instance in the Multi-AZ DB cluster, for example db.m6gd.xlarge. Not all DB instance classes are available in all AWS Regions, or for all database engines.

For the full list of DB instance classes and availability for your engine, see DB Instance Class in the Amazon RDS User Guide.

Valid for Cluster Type: Multi-AZ DB clusters only

Type: String

Required: No

DBClusterParameterGroupName

The name of the DB cluster parameter group to use for the DB cluster.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: String

Required: No

DBInstanceParameterGroupName

The name of the DB parameter group to apply to all instances of the DB cluster.

Note

When you apply a parameter group using the DBInstanceParameterGroupName parameter, the DB cluster isn't rebooted automatically. Also, parameter changes are applied immediately rather than during the next maintenance window.

Valid for Cluster Type: Aurora DB clusters only

Default: The existing name setting

Constraints:

  • The DB parameter group must be in the same DB parameter group family as this DB cluster.

  • The DBInstanceParameterGroupName parameter is valid in combination with the AllowMajorVersionUpgrade parameter for a major version upgrade only.

Type: String

Required: No

DBSubnetGroupName

The DB subnet group for the DB cluster.

Specify this parameter for one of these purposes:

  • To move an Aurora MySQL or Aurora PostgreSQL DB cluster that uses VPC networking to a different DB subnet group. The new DB subnet group can be in the same VPC or in a different VPC.

  • To enable VPC networking for an Aurora PostgreSQL DB cluster that uses an internet access gateway. Set EnableVPCNetworking to true and EnableInternetAccessGateway to false.

When you move a DB cluster to a different DB subnet group, you don't need to set EnableVPCNetworking. If you set it to false, Aurora rejects the request. Security groups in VpcSecurityGroupIds must belong to the VPC of the new DB subnet group. If you don't specify VpcSecurityGroupIds, the DB cluster uses the default security group of that VPC. If you don't specify NetworkType, the DB cluster uses IPV4. Both defaults apply even if the DB cluster stays in the same VPC.

An outage occurs during the move. The DB cluster uses VPC networking before, during, and after the move, and the move doesn't turn on an internet access gateway. If you specify the DB subnet group that the DB cluster already uses, the DB cluster isn't moved. The change is applied during the next maintenance window unless ApplyImmediately is enabled.

Aurora rejects the move if the DB cluster:

  • Is a member of an Aurora global database.

  • Uses Aurora Limitless Database.

  • Is a cross-Region or in-Region read replica, or is the source of one. Aurora Replicas in the DB cluster don't block the move.

  • Has enhanced binlog (Aurora MySQL), enhanced logical replication (Aurora PostgreSQL), or Babelfish turned on.

  • Is a target of an RDS Proxy.

  • Is part of a blue/green deployment.

  • Is the source of a zero-ETL integration.

  • Has a database activity stream that isn't stopped.

The move also fails if the DB cluster is switching to a different DB cluster parameter group, or if a change to enhanced binlog, enhanced logical replication, or Babelfish is pending in its DB cluster parameter group. Apply the change, and reboot if required, before you move the DB cluster.

If the move fails, Aurora returns the DB cluster to its original DB subnet group and cancels the change. To try again, call ModifyDBCluster again.

Aurora can't always return the DB cluster. If the move fails after Aurora starts to update the DB cluster endpoints, or if the rollback fails, the change doesn't complete. If Aurora can't restore the original network configuration, the DB instances in the DB cluster enter the incompatible-network state. In these cases, contact AWS Support.

Valid for Cluster Type: Aurora DB clusters only

Default: If you don't specify this parameter when you enable VPC networking, the DB cluster uses the default DB subnet group for your AWS account.

Constraints: The DB subnet group must contain a subnet in each Availability Zone that the DB instances in the DB cluster are located in.

Example: mydbsubnetgroup

Type: String

Required: No

DeletionProtection

Specifies whether the DB cluster has deletion protection enabled. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: Boolean

Required: No

Domain

The Active Directory directory ID to move the DB cluster to. Specify none to remove the cluster from its current domain. The domain must be created prior to this operation.

For more information, see Kerberos Authentication in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters only

Type: String

Required: No

DomainIAMRoleName

The name of the IAM role to use when making API calls to the Directory Service.

Valid for Cluster Type: Aurora DB clusters only

Type: String

Required: No

EnableGlobalWriteForwarding

Specifies whether to enable this DB cluster to forward write operations to the primary cluster of a global cluster (Aurora global database). By default, write operations are not allowed on Aurora DB clusters that are secondary clusters in an Aurora global database.

You can set this value only on Aurora DB clusters that are members of an Aurora global database. With this parameter enabled, a secondary cluster can forward writes to the current primary cluster, and the resulting changes are replicated back to this cluster. For the primary DB cluster of an Aurora global database, this value is used immediately if the primary is demoted by a global cluster API operation, but it does nothing until then.

Valid for Cluster Type: Aurora DB clusters only

Type: Boolean

Required: No

EnableHttpEndpoint

Specifies whether to enable the HTTP endpoint for an Aurora Serverless v1 DB cluster. By default, the HTTP endpoint isn't enabled.

When enabled, the HTTP endpoint provides a connectionless web service API (RDS Data API) for running SQL queries on the Aurora Serverless v1 DB cluster. You can also query your database from inside the RDS console with the RDS query editor.

For more information, see Using RDS Data API in the Amazon Aurora User Guide.

Note

This parameter applies only to Aurora Serverless v1 DB clusters. To enable or disable the HTTP endpoint for an Aurora Serverless v2 or provisioned DB cluster, use the EnableHttpEndpoint and DisableHttpEndpoint operations.

Valid for Cluster Type: Aurora DB clusters only

Type: Boolean

Required: No

EnableIAMDatabaseAuthentication

Specifies whether to enable mapping of AWS Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.

For more information, see IAM Database Authentication in the Amazon Aurora User Guide or IAM database authentication for MariaDB, MySQL, and PostgreSQL in the Amazon RDS User Guide.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: Boolean

Required: No

EnableInternetAccessGateway

Specifies whether the DB cluster uses an internet access gateway. With an internet access gateway, you connect to the DB cluster over the internet without a VPC.

Set to true together with EnableVPCNetworking set to false to move the DB cluster out of its VPC. Set to false together with EnableVPCNetworking set to true to move the DB cluster into a VPC. A DB cluster can't use VPC networking and an internet access gateway at the same time.

Valid for Cluster Type: Aurora PostgreSQL DB clusters only

Type: Boolean

Required: No

EnableLimitlessDatabase

Specifies whether to enable Aurora Limitless Database. You must enable Aurora Limitless Database to create a DB shard group.

Valid for: Aurora DB clusters only

Note

This setting is no longer used. Instead use the ClusterScalabilityType setting when you create your Aurora Limitless Database DB cluster.

Type: Boolean

Required: No

EnableLocalWriteForwarding

Specifies whether read replicas can forward write operations to the writer DB instance in the DB cluster. By default, write operations aren't allowed on reader DB instances.

Valid for: Aurora DB clusters only

Type: Boolean

Required: No

EnablePerformanceInsights

Specifies whether to turn on Performance Insights for the DB cluster.

For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: Boolean

Required: No

EnableVPCNetworking

Specifies whether VPC networking is enabled for the DB cluster. Set to false to disable VPC networking for the DB cluster.

A DB cluster without VPC networking needs an internet access gateway and IAM database authentication. Set EnableInternetAccessGateway and EnableIAMDatabaseAuthentication to true, and set MasterUserAuthenticationType to iam-db-auth.

Set to true to re-enable VPC networking for a DB cluster that uses an internet access gateway. You can also specify DBSubnetGroupName, VpcSecurityGroupIds, and NetworkType.

The change is applied during the next maintenance window unless ApplyImmediately is enabled.

To move a DB cluster that already uses VPC networking to a different DB subnet group, you don't need to set this parameter. Specify DBSubnetGroupName instead.

Valid for Cluster Type: Aurora PostgreSQL DB clusters only

Type: Boolean

Required: No

EngineLifecycleSupport

The lifecycle type for this DB cluster.

You can use this setting to enroll your DB cluster into Amazon RDS Extended Support or to opt out. With RDS Extended Support, you can run the selected major engine version on your DB cluster past the end of standard support for that engine version. For more information, see the following sections:

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Valid Values: open-source-rds-extended-support | open-source-rds-extended-support-disabled

Type: String

Required: No

EngineMode

The DB engine mode of the DB cluster, either provisioned or serverless.

Note

The DB engine mode can be modified only from serverless to provisioned.

For more information, see CreateDBCluster.

Valid for Cluster Type: Aurora DB clusters only

Type: String

Required: No

EngineVersion

The version number of the database engine to which you want to upgrade. Changing this parameter results in an outage. The change is applied during the next maintenance window unless ApplyImmediately is enabled.

If the cluster that you're modifying has one or more read replicas, all replicas must be running an engine version that's the same or later than the version you specify.

To list all of the available engine versions for Aurora MySQL, use the following command:

aws rds describe-db-engine-versions --engine aurora-mysql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for Aurora PostgreSQL, use the following command:

aws rds describe-db-engine-versions --engine aurora-postgresql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for RDS for MySQL, use the following command:

aws rds describe-db-engine-versions --engine mysql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for RDS for PostgreSQL, use the following command:

aws rds describe-db-engine-versions --engine postgres --query "DBEngineVersions[].EngineVersion"

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: String

Required: No

Iops

The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for each DB instance in the Multi-AZ DB cluster.

For information about valid IOPS values, see Amazon RDS Provisioned IOPS storage in the Amazon RDS User Guide.

Valid for Cluster Type: Multi-AZ DB clusters only

Constraints:

  • Must be a multiple between .5 and 50 of the storage amount for the DB cluster.

Type: Integer

Required: No

ManageMasterUserPassword

Specifies whether to manage the master user password with AWS Secrets Manager.

If the DB cluster doesn't manage the master user password with AWS Secrets Manager, you can turn on this management. In this case, you can't specify MasterUserPassword.

If the DB cluster already manages the master user password with AWS Secrets Manager, and you specify that the master user password is not managed with AWS Secrets Manager, then you must specify MasterUserPassword. In this case, RDS deletes the secret and uses the new password for the master user specified by MasterUserPassword.

For more information, see Password management with AWS Secrets Manager in the Amazon RDS User Guide and Password management with AWS Secrets Manager in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: Boolean

Required: No

MasterUserAuthenticationType

Specifies the authentication type for the master user. With IAM master user authentication, you can change the master DB user to use IAM database authentication.

You can specify one of the following values:

  • password - Use standard database authentication with a password.

  • iam-db-auth - Use IAM database authentication for the master user.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

This option is only valid for RDS for PostgreSQL and Aurora PostgreSQL engines.

Type: String

Valid Values: password | iam-db-auth

Required: No

MasterUserPassword

The new password for the master database user.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

  • Must contain from 8 to 41 characters.

  • Can contain any printable ASCII character except "/", """, or "@".

  • Can't be specified if ManageMasterUserPassword is turned on.

Type: String

Required: No

MasterUserSecretKmsKeyId

The AWS KMS key identifier to encrypt a secret that is automatically generated and managed in AWS Secrets Manager.

This setting is valid only if both of the following conditions are met:

  • The DB cluster doesn't manage the master user password in AWS Secrets Manager.

    If the DB cluster already manages the master user password in AWS Secrets Manager, you can't change the KMS key that is used to encrypt the secret.

  • You are turning on ManageMasterUserPassword to manage the master user password in AWS Secrets Manager.

    If you are turning on ManageMasterUserPassword and don't specify MasterUserSecretKmsKeyId, then the aws/secretsmanager KMS key is used to encrypt the secret. If the secret is in a different AWS account, then you can't use the aws/secretsmanager KMS key to encrypt the secret, and you must use a customer managed KMS key.

The AWS KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different AWS account, specify the key ARN or alias ARN.

There is a default KMS key for your AWS account. Your AWS account has a different default KMS key for each AWS Region.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: String

Required: No

MonitoringInterval

The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB cluster. To turn off collecting Enhanced Monitoring metrics, specify 0.

If MonitoringRoleArn is specified, also set MonitoringInterval to a value other than 0.

Valid for Cluster Type: Multi-AZ DB clusters only

Valid Values: 0 | 1 | 5 | 10 | 15 | 30 | 60

Default: 0

Type: Integer

Required: No

MonitoringRoleArn

The Amazon Resource Name (ARN) for the IAM role that permits RDS to send Enhanced Monitoring metrics to Amazon CloudWatch Logs. An example is arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, see To create an IAM role for Amazon RDS Enhanced Monitoring in the Amazon RDS User Guide.

If MonitoringInterval is set to a value other than 0, supply a MonitoringRoleArn value.

Valid for Cluster Type: Multi-AZ DB clusters only

Type: String

Required: No

NetworkType

The network type of the DB cluster.

The network type is determined by the DBSubnetGroup specified for the DB cluster. A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols (DUAL).

If the subnets in the DB subnet group support only the IPv4 protocol, you can't set this parameter to DUAL.

If you don't specify this parameter when you move the DB cluster to a different DB subnet group with DBSubnetGroupName, the DB cluster uses IPV4, even if it currently uses DUAL. To keep dual-stack mode, specify DUAL. The new DB subnet group must support the network type.

Don't specify it when you set EnableVPCNetworking to false.

For more information, see Working with a DB instance in a VPC in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters only

Valid Values: IPV4 | DUAL

Type: String

Required: No

NewDBClusterIdentifier

The new DB cluster identifier for the DB cluster when renaming a DB cluster. This value is stored as a lowercase string.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

  • Must contain from 1 to 63 letters, numbers, or hyphens.

  • The first character must be a letter.

  • Can't end with a hyphen or contain two consecutive hyphens.

Example: my-cluster2

Type: String

Required: No

OptionGroupName

The option group to associate the DB cluster with.

DB clusters are associated with a default option group that can't be modified.

Type: String

Required: No

PerformanceInsightsKMSKeyId

The AWS KMS key identifier for encryption of Performance Insights data.

The AWS KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.

If you don't specify a value for PerformanceInsightsKMSKeyId, then Amazon RDS uses your default KMS key. There is a default KMS key for your AWS account. Your AWS account has a different default KMS key for each AWS Region.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: String

Required: No

PerformanceInsightsRetentionPeriod

The number of days to retain Performance Insights data.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Valid Values:

  • 7

  • month * 31, where month is a number of months from 1-23. Examples: 93 (3 months * 31), 341 (11 months * 31), 589 (19 months * 31)

  • 731

Default: 7 days

If you specify a retention period that isn't valid, such as 94, Amazon RDS issues an error.

Type: Integer

Required: No

Port

The port number on which the DB cluster accepts connections.

Valid for Cluster Type: Aurora DB clusters only

Valid Values: 1150-65535

Default: The same port as the original DB cluster.

Type: Integer

Required: No

PreferredBackupWindow

The daily time range during which automated backups are created if automated backups are enabled, using the BackupRetentionPeriod parameter.

The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region. To view the time blocks available, see Backup window in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

  • Must be in the format hh24:mi-hh24:mi.

  • Must be in Universal Coordinated Time (UTC).

  • Must not conflict with the preferred maintenance window.

  • Must be at least 30 minutes.

Type: String

Required: No

PreferredMaintenanceWindow

The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred DB Cluster Maintenance Window in the Amazon Aurora User Guide.

Constraints:

  • Must be in the format ddd:hh24:mi-ddd:hh24:mi.

  • Days must be one of Mon | Tue | Wed | Thu | Fri | Sat | Sun.

  • Must be in Universal Coordinated Time (UTC).

  • Must be at least 30 minutes.

Type: String

Required: No

RotateMasterUserPassword

Specifies whether to rotate the secret managed by AWS Secrets Manager for the master user password.

This setting is valid only if the master user password is managed by RDS in AWS Secrets Manager for the DB cluster. The secret value contains the updated password.

For more information, see Password management with AWS Secrets Manager in the Amazon RDS User Guide and Password management with AWS Secrets Manager in the Amazon Aurora User Guide.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Constraints:

  • You must apply the change immediately when rotating the master user password.

Type: Boolean

Required: No

ScalingConfiguration

The scaling properties of the DB cluster. You can only modify scaling properties for DB clusters in serverless DB engine mode.

Valid for Cluster Type: Aurora DB clusters only

Type: ScalingConfiguration object

Required: No

ServerlessV2ScalingConfiguration

Contains the scaling configuration of an Aurora Serverless v2 DB cluster.

For more information, see Using Amazon Aurora Serverless v2 in the Amazon Aurora User Guide.

Type: ServerlessV2ScalingConfiguration object

Required: No

StorageType

The storage type to associate with the DB cluster.

For information on storage types for Aurora DB clusters, see Storage configurations for Amazon Aurora DB clusters. For information on storage types for Multi-AZ DB clusters, see Settings for creating Multi-AZ DB clusters.

When specified for a Multi-AZ DB cluster, a value for the Iops parameter is required.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Valid Values:

  • Aurora DB clusters - aurora | aurora-iopt1

  • Multi-AZ DB clusters - io1 | io2 | gp3

Default:

  • Aurora DB clusters - aurora

  • Multi-AZ DB clusters - io1

Type: String

Required: No

VpcSecurityGroupIds.VpcSecurityGroupId.N

A list of EC2 VPC security groups to associate with this DB cluster.

Valid only for DB clusters inside a VPC. For a DB cluster that uses an internet access gateway, specify this parameter only when you re-enable VPC networking. Set EnableVPCNetworking to true and EnableInternetAccessGateway to false.

When you move the DB cluster to a different DB subnet group with DBSubnetGroupName, or re-enable VPC networking, the security groups must belong to the VPC of the DB subnet group. If you leave out this parameter in those requests, the DB cluster uses the default security group of that VPC, even for a move within the same VPC. To keep the current security groups, specify their IDs. If the VPC is a shared VPC, you must specify this parameter.

Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters

Type: Array of strings

Required: No

Response Elements

The following element is returned by the service.

DBCluster

Contains the details of an Amazon Aurora DB cluster or Multi-AZ DB cluster.

For an Amazon Aurora DB cluster, this data type is used as a response element in the operations CreateDBCluster, DeleteDBCluster, DescribeDBClusters, FailoverDBCluster, ModifyDBCluster, PromoteReadReplicaDBCluster, RestoreDBClusterFromS3, RestoreDBClusterFromSnapshot, RestoreDBClusterToPointInTime, StartDBCluster, and StopDBCluster.

For a Multi-AZ DB cluster, this data type is used as a response element in the operations CreateDBCluster, DeleteDBCluster, DescribeDBClusters, FailoverDBCluster, ModifyDBCluster, RebootDBCluster, RestoreDBClusterFromSnapshot, and RestoreDBClusterToPointInTime.

For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.

For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.

Type: DBCluster object

Errors

For information about the errors that are common to all actions, see Common Error Types.

DBClusterAlreadyExistsFault

The user already has a DB cluster with the given identifier.

HTTP Status Code: 400

DBClusterNotFoundFault

DBClusterIdentifier doesn't refer to an existing DB cluster.

HTTP Status Code: 404

DBClusterParameterGroupNotFound

DBClusterParameterGroupName doesn't refer to an existing DB cluster parameter group.

HTTP Status Code: 404

DBInstanceAlreadyExists

The user already has a DB instance with the given identifier.

HTTP Status Code: 400

DBParameterGroupNotFound

DBParameterGroupName doesn't refer to an existing DB parameter group.

HTTP Status Code: 404

DBSubnetGroupNotFoundFault

DBSubnetGroupName doesn't refer to an existing DB subnet group.

HTTP Status Code: 404

DomainNotFoundFault

Domain doesn't refer to an existing Active Directory domain.

HTTP Status Code: 404

InvalidDBClusterStateFault

The requested operation can't be performed while the cluster is in this state.

HTTP Status Code: 400

InvalidDBInstanceState

The DB instance isn't in a valid state.

HTTP Status Code: 400

InvalidDBSecurityGroupState

The state of the DB security group doesn't allow deletion.

HTTP Status Code: 400

InvalidDBSubnetGroupStateFault

The DB subnet group cannot be deleted because it's in use.

HTTP Status Code: 400

InvalidGlobalClusterStateFault

The global cluster is in an invalid state and can't perform the requested operation.

HTTP Status Code: 400

InvalidSubnet

The requested subnet is invalid, or multiple subnets were requested that are not all in a common VPC.

HTTP Status Code: 400

InvalidVPCNetworkStateFault

The DB subnet group doesn't cover all Availability Zones after it's created because of users' change.

HTTP Status Code: 400

KMSKeyNotAccessibleFault

An error occurred accessing an AWS KMS key.

HTTP Status Code: 400

NetworkTypeNotSupported

The network type is invalid for the DB instance. Valid nework type values are IPV4 and DUAL.

HTTP Status Code: 400

OptionGroupNotFoundFault

The specified option group could not be found.

HTTP Status Code: 404

StorageQuotaExceeded

The request would result in the user exceeding the allowed amount of storage available across all DB instances.

HTTP Status Code: 400

StorageTypeNotAvailableFault

The aurora-iopt1 storage type isn't available, because you modified the DB cluster to use this storage type less than one month ago.

HTTP Status Code: 400

StorageTypeNotSupported

The specified StorageType can't be associated with the DB instance.

HTTP Status Code: 400

VpcEncryptionControlViolation

The operation violates VPC encryption control settings. Make sure that your DB instance type supports the Nitro encryption-in-transit capability, or modify your VPC's encryption controls to not enforce encryption-in-transit.

HTTP Status Code: 400

Examples

Modifying an Aurora DB cluster

This example illustrates one usage of ModifyDBCluster.

Sample Request

https://rds.us-west-2.amazonaws.com/ ?Action=ModifyDBCluster &DBClusterIdentifier=sample-cluster3 &SignatureMethod=HmacSHA256 &SignatureVersion=4 &Version=2014-10-31 &X-Amz-Algorithm=AWS4-HMAC-SHA256 &X-Amz-Credential=AKIADQKE4SARGYLE/20140725/us-west-2/rds/aws4_request &X-Amz-Date=20140725T161457Z &X-Amz-SignedHeaders=content-type;host;user-agent;x-amz-content-sha256;x-amz-date &X-Amz-Signature=d6d1c65c2e94f5800ab411a3f7336625820b103713b6c063430900514e21d784

Sample Response

<ModifyDBClusterResponse xmlns="http://rds.amazonaws.com/doc/2014-10-31/"> <ModifyDBClusterResult> <DBCluster> <Engine>aurora5.6</Engine> <Status>available</Status> <BackupRetentionPeriod>0</BackupRetentionPeriod> <DBSubnetGroup>my-subgroup</DBSubnetGroup> <EngineVersion>5.6.10a</EngineVersion> <Endpoint>sample-cluster3.cluster-cefgqfx9y5fy.us-east-1.rds.amazonaws.com</Endpoint> <DBClusterIdentifier>sample-cluster3</DBClusterIdentifier> <PreferredBackupWindow>07:06-07:36</PreferredBackupWindow> <PreferredMaintenanceWindow>tue:10:18-tue:10:48</PreferredMaintenanceWindow> <DBClusterMembers> <DBClusterMember> <IsClusterWriter>true</IsClusterWriter> <DBInstanceIdentifier>sample-cluster3-master</DBInstanceIdentifier> </DBClusterMember> <DBClusterMember> <IsClusterWriter>false</IsClusterWriter> <DBInstanceIdentifier>sample-cluster3-read1</DBInstanceIdentifier> </DBClusterMember> </DBClusterMembers> <AllocatedStorage>15</AllocatedStorage> <MasterUsername>awsuser</MasterUsername> </DBCluster> </ModifyDBClusterResult> <ResponseMetadata> <RequestId>d2cd0e2f-1416-11e4-9210-cf99df4125d0</RequestId> </ResponseMetadata> </ModifyDBClusterResponse>

Modifying a Multi-AZ DB cluster

This example illustrates one usage of ModifyDBCluster.

Sample Request

https://rds.us-west-2.amazonaws.com/ ?Action=ModifyDBCluster &DBClusterIdentifier=my-multi-az-cluster &DBClusterInstanceClass=db.m6gd.large &SignatureMethod=HmacSHA256 &SignatureVersion=4 &Version=2014-10-31 &X-Amz-Algorithm=AWS4-HMAC-SHA256 &X-Amz-Credential=AKIADQKE4SARGYLE/20211026/us-west-2/rds/aws4_request &X-Amz-Date=20211027T000032Z &X-Amz-SignedHeaders=content-type;host;user-agent;x-amz-content-sha256;x-amz-date &X-Amz-Signature=d6d1c65c2e94f5800ab411a3f7336625820b103713b6c063430900514e21d784

Sample Response

<ModifyDBClusterResponse xmlns="http://rds.amazonaws.com/doc/2014-10-31/"> <ModifyDBClusterResult> <DBCluster> <CrossAccountClone>false</CrossAccountClone> <AllocatedStorage>100</AllocatedStorage> <DatabaseName>mydb</DatabaseName> <AssociatedRoles /> <AvailabilityZones> <AvailabilityZone>us-west-2a</AvailabilityZone> <AvailabilityZone>us-west-2b</AvailabilityZone> <AvailabilityZone>us-west-2c</AvailabilityZone> </AvailabilityZones> <ReadReplicaIdentifiers /> <Iops>1000</Iops> <PerformanceInsightsKMSKeyId>arn:aws:kms:us-west-2:123456789012:key/123EXAMPLE-abcd-4567-efgEXAMPLE</PerformanceInsightsKMSKeyId> <PerformanceInsightsRetentionPeriod>7</PerformanceInsightsRetentionPeriod> <EngineVersion>8.0.26</EngineVersion> <MasterUsername>admin</MasterUsername> <DBClusterMembers> <DBClusterMember> <DBInstanceIdentifier>my-multi-az-cluster-instance-3</DBInstanceIdentifier> <DBClusterParameterGroupStatus>in-sync</DBClusterParameterGroupStatus> <PromotionTier>1</PromotionTier> <IsClusterWriter>false</IsClusterWriter> </DBClusterMember> <DBClusterMember> <DBInstanceIdentifier>my-multi-az-cluster-instance-2</DBInstanceIdentifier> <DBClusterParameterGroupStatus>in-sync</DBClusterParameterGroupStatus> <PromotionTier>1</PromotionTier> <IsClusterWriter>false</IsClusterWriter> </DBClusterMember> <DBClusterMember> <DBInstanceIdentifier>my-multi-az-cluster-instance-1</DBInstanceIdentifier> <DBClusterParameterGroupStatus>in-sync</DBClusterParameterGroupStatus> <PromotionTier>1</PromotionTier> <IsClusterWriter>true</IsClusterWriter> </DBClusterMember> </DBClusterMembers> <HttpEndpointEnabled>false</HttpEndpointEnabled> <Port>3306</Port> <MonitoringInterval>30</MonitoringInterval> <BackupRetentionPeriod>2</BackupRetentionPeriod> <KmsKeyId>arn:aws:kms:us-west-2:123456789012:key/123EXAMPLE-abcd-4567-efgEXAMPLE</KmsKeyId> <DBClusterIdentifier>my-multi-az-cluster</DBClusterIdentifier> <DbClusterResourceId>cluster-TSW4QJNKY3P2DNDRR523BDGEIU</DbClusterResourceId> <Status>available</Status> <LatestRestorableTime>2021-10-26T23:55:00Z</LatestRestorableTime> <PreferredBackupWindow>11:34-12:04</PreferredBackupWindow> <DeletionProtection>false</DeletionProtection> <Endpoint>my-multi-az-cluster.cluster-123456789012.us-west-2.rds.amazonaws.com</Endpoint> <EngineMode>provisioned</EngineMode> <Engine>mysql</Engine> <ReaderEndpoint>my-multi-az-cluster.cluster-ro-123456789012.us-west-2.rds.amazonaws.com</ReaderEndpoint> <PubliclyAccessible>true</PubliclyAccessible> <IAMDatabaseAuthenticationEnabled>false</IAMDatabaseAuthenticationEnabled> <EarliestRestorableTime>2021-10-26T20:42:03.375Z</EarliestRestorableTime> <ClusterCreateTime>2021-10-26T20:31:54.943Z</ClusterCreateTime> <PerformanceInsightsEnabled>true</PerformanceInsightsEnabled> <MultiAZ>true</MultiAZ> <DomainMemberships /> <MonitoringRoleArn>arn:aws:iam::123456789012:role/enhance-monitoring-role</MonitoringRoleArn> <StorageEncrypted>true</StorageEncrypted> <DBSubnetGroup>mysubnet1</DBSubnetGroup> <VpcSecurityGroups> <VpcSecurityGroupMembership> <VpcSecurityGroupId>sg-6921cc28</VpcSecurityGroupId> <Status>active</Status> </VpcSecurityGroupMembership> </VpcSecurityGroups> <HostedZoneId>Z3GZ3VYA3PGHTQ</HostedZoneId> <TagList /> <PreferredMaintenanceWindow>sat:07:05-sat:07:35</PreferredMaintenanceWindow> <DBClusterParameterGroup>my-multi-az-cpg</DBClusterParameterGroup> <StorageType>io1</StorageType> <DBClusterInstanceClass>db.m6gd.large</DBClusterInstanceClass> <CopyTagsToSnapshot>false</CopyTagsToSnapshot> <AutoMinorVersionUpgrade>true</AutoMinorVersionUpgrade> <DBClusterArn>arn:aws:rds:us-west-2:123456789012:cluster:my-multi-az-cluster</DBClusterArn> </DBCluster> </ModifyDBClusterResult> <ResponseMetadata> <RequestId>69673d54-e48e-4ba4-9333-c5a6c1e7526a</RequestId> </ResponseMetadata> </ModifyDBClusterResponse>

See Also

For more information about using this API in one of the language-specific AWS SDKs, see the following: