【C++PCL】点云处理法向量采样

作者:迅卓科技
简介:本人从事过多项点云项目,并且负责的项目均已得到好评!
公众号:迅卓科技888

目录

        1.原理介绍

        2.代码效果

        3.源码展示

        4.参数调试

        

点云处理中的RANSAC平面估计与法向量精修 在三维计算机视觉和点云处理中,法向量估计是理解几何表面的基础技术。其核心原理是通过分析局部邻域点的空间分布,计算垂直于表面的方向向量。RANSAC(随机抽样一致)算法因其出色的鲁棒性,成为处理含噪声点云数据的主流方法,特别适用于平面检测等任务。该算法通过迭代随机采样和一致性验证,能有效抵抗离群点干扰。结合PCA(主成分分析)进行法向量精修,可进一步提升估计精度。这些技术在自动驾驶的环境感知、工业检测的表面分析、AR/VR的场景重建等领域都有广泛应用。PCL(Point Cloud Library)作为行业标 阅读详情

相关推荐

PCL 计算点云法向量与表面曲率(C++详细过程版)

PCL中的算法邻域搜索只能是K近邻搜索或半径搜索,无法实现混合搜索;本文C++详细过程实现的代码对该不足进行改进,可以实现混合搜索。在一些应用中可以大大提高算法效率。

点云侠的博客 2284

PCL 法线空间采样【2026最新版】

法线空间采样,它在法向量空间内均匀随机抽样,使所选点之间的法线分布尽可能大,结果表现为地物特征变化大的地方剩余点较多,变化小的地方剩余点稀少,可有效保持地物特征。

点云侠的博客 37万+

【C++PCL】点云处理曲率采样

点云是由大量离散点组成的三维数据集,而曲率则是描述曲面局部形状特征的重要参数之一。在点云处理中,利用曲率信息进行采样是一种常见的方法,可以帮助提取点云中的关键特征点。在点云中,每个点都对应着曲面上的一个位置。曲率描述了该点附近曲面的弯曲程度,通常通过密切圆半径的倒数来表示。密切圆半径越小,曲率越大,反之亦然。密切圆是通过曲面上某一点的切平面与曲面相切,并且在切点处与曲面有相同的曲率。密切圆的半径即为曲率的倒数。根据曲率的定义,我们可以在点云中计算每个点的曲率值。

weixin_45196569的博客 1464

PCL RANSAC拟合空间圆【2026最新版】

RANSAC三维点云空间3D圆拟合。博客长期更新,本文最新更新时间为:2026年4月13日。代码在PCL1.15.0中测试通过

点云侠的博客 7455

PCL 使用RANSAC拟合平面【2026最新版】

RANSAC拟合平面算法原理和实现流程详解以及最大迭代次数和内点期望概率的设置方法。最后再对拟合后的平面法向量与向量(1,1,1)进行定向。博客长期更新,最近一次更新时间为:2026年4月24日。

点云侠的博客 42万+

【2026最新版】PCL点云处理算法汇总(C++长期更新版)

PCL学习目录。博客长期更新,最近一次更新时间为:2026年10月4日。

点云侠的博客 63万+

【C++PCL】点云处理基于法向量夹角的欧式聚类分割

根据点之间的欧氏距离和点之间的法线角度偏差将空间区域分解为簇。添加到簇中的每个点都是另一个半径搜索的起点,半径范围内的每个点将与原点的法线角度和欧氏距离进行比较。如果两者都低于各自的阈值,则该点将被添加到集群中。一般来说,聚类算法不会停止在光滑表面上,而是停止在具有锐利边缘的表面上。

weixin_45196569的博客 733

【C++PCL】点云处理表面采样

空间划分: 算法首先在点云的空间范围内进行递归划分。计算点云中每个维度的最大值和最小值,确定整个点云的包围盒。选择一个划分维度(通常选择范围最大的维度),将点云在该维度上分为两半。对每一半递归进行同样的划分,直到每个分块中的点数小于或等于预设的样本数。采样对每个分块,根据设定的采样比例随机选择一部分点。计算所选点的法向量和曲率,并将这些信息附加到采样点上。法向量计算计算点的协方差矩阵和质心。求解协方差矩阵的特征值和特征向量,得到法向量和曲率。将法向量和曲率信息附加到采样点中。

weixin_45196569的博客 549

PCL点云处理算法汇总(C++长期更新低价精品版)

所有内容均抄自CSDN点云侠,质量无忧,价格更低。关注我,坐等更新即可永久享受低价优质服务。欢迎收藏、关注、评论、转发,一键四连。

m0_51204289的博客 2715

PCL 法向量夹角剔除错误匹配点对【2026最新版】

实现了一种简单的基于对应点法线角度的对应关系去除方法。博客长期更新,本文最新更新时间为:2026年5月24日。

点云侠的博客 41万+

【C++PCL】点云处理RANSAC圆柱拟合

提取曲面法线 :通过估计点云表面的法线信息,可以进一步提高拟合精度;随机采样 :从预处理后的点云中随机选择一组点作为初始圆柱模型的样本点;参数估计 :根据采样点计算圆柱参数,包括圆心、方向和半径等;点归类 :将剩余的点归类为内部点或外部点,根据点到圆柱模型的距离;模型评价 :计算内部点和外部点的数量,并根据设定的闯值确定拟合质量;RANSAC 选代 :重复上述步骤,通过多次选代选择具有最佳拟合结果的圆柱模型。

weixin_45196569的博客 2139

PCL点云处理之基于法向量分割提取平面点和立面点(三十七)

基于法向量的点云分割

weixin_44329757的博客 2838

PCL点云处理:计算整体法向量

在上述代码中,我们首先创建了一个NormalEstimation对象ne,并将输入点云设置为我们加载的点云数据。接下来,我们创建了一个PointCloud对象cloud_normals,用于存储计算得到的法向量。在点云处理中,计算法向量是一个常见的任务,它可以用于许多应用,如表面重建、物体识别和点云配准。本文将介绍如何使用PCL库计算点云的整体法向量,并提供相应的源代码。NormalEstimation类提供了多种方法来估计点云的法向量,包括最常用的基于最近邻的方法。首先,我们需要加载点云数据。

UtiExamples的博客 304

el-upload自定义上传dwg/dxf文件并且携带额外参数(CAD)

需求:需要使用el-upload自定义上传cad的图片或普通图片,这边需要判断区分下,以及上传后清空上传文件列表。

请叫我欧皇!的博客 1537

android 数据库锁的问题

最近在项目中遇到一个错误: 12-26 17:29:10.501 32592 32644 W SQLiteConnectionPool: The connection pool for database '***.db' has been unable to grant a connection to thread 1378 (thread-pool-0) with flags 0x2 for...

低调的成长 2907

Skyworks SKY85331-11的Wi-Fi 6 (802.11ax)标准 2.4G 高功率WLAN前端模块解决方案

SKY85331-11是高度集成的2 GHz前端模块(FEM)包含2 GHz单刀双掷(SPDT)发送/接收(T / R)开关,2 GHz低噪声放大器(LNA)带旁路和一个2 GHz功率放大器(PA),用于大功率802.11ax应用程序和系统LNA和PA禁用功能可确保低漏电流 关闭模式。 包括一个集成的功率检测器以提供系统内的闭环功率控制。该设备提供Small (24-pin, 3 x 5 mm) (LGA)封装。 图1.引脚配置和封装如图所示 图2.信号引脚分配和功能引脚描述 图...

zhangbao19890622的博客 4516

树莓派4B学习笔记(5)—— 来个GPIO操作吧

一. GPIO库介绍 对于树莓派,现在有wiringPi,BCM2835,python三种库可以使用。 python 开发语言:python 简单介绍:树莓派官方资料中推荐且容易上手,毫无疑问的说python非常适合树莓派,树莓派也非常适合python。 wiring PI 开发语言:C、C++ 简单介绍:功能很强大,适合那些具有C语言基础,在接触树莓派之前已经接触过单片机或者嵌入式开发的人群。wiring Pi的API函数和arduino非常相似,且作者也给出了很多示例代码,这也使得它广受欢迎。

weixin_44415639的博客 8758

从硬件拆解到图像生成:一次搞懂MRI设备(主磁体、梯度线圈、射频系统)是如何协同工作的

本文深入解析MRI设备的三大核心系统——主磁体、梯度线圈和射频系统如何协同工作,实现从量子现象到诊断图像的转化。通过详细的技术参数和临床案例,揭示磁共振成像(MRI)在医疗图像处理中的精密工程原理和最新技术突破,帮助读者全面理解这一现代医学影像技术的运作机制。

weixin_33734785的博客 553

ESP-IDF 5.4下esp32-camera组件编译报错?手把手教你解决头文件缺失问题

本文详细解析了ESP-IDF 5.4环境下esp32-camera组件编译时出现的头文件缺失问题,提供了从目录结构优化、CMake配置到VSCode智能感知设置的完整解决方案。针对第三方组件集成难题,文章特别强调了PRIV_REQUIRES依赖声明和路径配置的关键作用,帮助开发者高效解决编译错误并建立稳定的开发环境。

weixin_28829629的博客 311

基于反事实的因果推理Causal inference based on counterfactuals--一万六千字文献详细解读(因果关系的推理应用)【全文总结】

基于反事实的因果推理Causal inference based on counterfactuals--一万六千字文献详细解读(因果关系的推理应用)【全文总结】---来自一位即将入学的准研一,也希望这篇文章能够激励自己不断走下去!!

qq_46044325的博客 4447

树冠体积计算之体元累加法

因为是自己之前研究的一个方向,就复现了一下论文中的这个方法,在此正好记录一下。 文章目录一、简介二、代码实现(MATLAB)三、小结 一、简介 简而言之,其实就是一句话,即以固定大小的体元模拟不规则的树冠形状。按照论文中的思路主要就是将树冠沿树高方向以 k 为步长进行等距离分段,把每一段树冠的点投影到垂直于树高方向的平面上,再对该平面划分成大小为 k × k 的像元,根据投影到各个像元内点的数量,判断该像元的有效性,统计有效像元的数量 T,则树冠体积为 T 个 k × k × k 的体元之和。如下图所示:

dayuhaitang1的博客 2611

Devexpress16.2.6破解工具

Devexpress16.2.6破解工具Devexpress16.2.6破解工具Devexpress16.2.6破解工具Devexpress16.2.6破解工具

IMSL CNL 7.0.0 (x86-64)Crack

IMSL CNL 7.0.0 (x86-64)Crack intel的算法库破解文件,这是C++版本的破解文件

NTscan扫描工具

ntscan是一个扫描器,可以扫描没有密码和弱密码的共享,先到配置文件中填写猜测的用户名和密码,扫描过程中右侧出现的是扫描日志。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

上一篇: 【C++PCL】点云处理随机采样
下一篇: 【C++PCL】点云处理最远点采样
迅卓科技
博客等级 码龄7年 1336粉丝 153原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

迅卓科技

绝对好东西

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值
⌂ 换网址