《点云处理算法》——GROR配准

VIP《点云处理算法》——GROR配准
GROR点云配准
开通可读全文 ·1.3k 人阅读
最低0.47元/天 解锁文章


一、 效果展示

请添加图片描述

二、VS运行

最近和小伙伴交流,他发现一个好用的配准方法,放在这里实现一下

2.1 github源码下载

gror

2.2 编译运行

下载好的源码添加到vs中,添加pcl环境变量,即可编译运行,其针对重叠率相对较低的点云效果也挺好
在这里插入图片描述

红色目标点云与原始点云重叠率50%,配准效果良好

在这里插入图片描述

三、后续集成

后续会集成到专栏

VIP 点云全局配准复现——Super4pcs实现 点云全局配准复现——Super4pcs实现demo演示项目地址复现流程数据集测试后续 demo演示 项目地址 github:项目链接 资料文档:super4pcs 复现流程 由于Super4pcs原有的github已经不维护了,新的转移到opengr中,即上文链接,所以要实现super4pcs,需要以下操作。 1、下载源码 数据集测试 后续 ...... 开通可读全文·7.4k 阅读·16 点赞·82 收藏 阅读全文

相关推荐

点云全局配准复现——Go-icp实现

点云全局配准复现——GOICP复现demo演示项目地址复现流程数据集测试后续 demo演示 官方数据集 自己的数据 项目地址 github链接:Go-icp 复现流程 1、下载源码 下载完成后解压缩,将文件夹中所有的.h与.cpp文件拷贝到新的工程,不需要任何依赖项。 2、新建vs工程 将拷贝过来的文件,添加到相应的头文件与源文件中,此时可以直接编译运行。 其中根据jly_main函数,设置相应的调试参数,如下图所示 第一第二分别为待匹配的点云数据,txt格式 第三为随机采样后的点,如果不设置,默

阁楼 6864

《QT+PCL》点云配准进阶——GROR配准

GROR点云配准

阁楼 1320

PCL使用GROR配准

我在逛github的时候偶然发现的我为了方便检测效果稍微修改了主程序,这里只展示我的主程序,其他文件可以去上述网址下载,如果github进不去,可以在这里下载。

qq_58060770的博客 653

基于PCL、Open3d、Easy3d 、VTK等常见开源库的QT开发

PCL+QT开发

阁楼 2万+

【STM32Cube HAL】输入捕获(六)——脉宽测量

1

HAHAHA 4912

433MHz无线通信避坑指南:如何解决信号干扰和误码问题

本文深入探讨433MHz无线通信中的信号干扰和误码问题,提供从射频前端设计到协议优化的全链路解决方案。通过天线匹配、电源噪声抑制、曼彻斯特编码改进及实时频点切换等技术,显著提升通信稳定性和距离。适合智能家居和工业无线控制系统的开发者参考。

weixin_29288313的博客 426

Orange Pi 3B+刷入EmuELEC全过程:手把手教程

手把手教你如何在Orange Pi 3B+上成功刷入emuelec系统,涵盖烧录工具、镜像下载到启动设置的完整流程,让复古游戏体验轻松实现。

weixin_35732273的博客 1100

Fastp实战指南:高效处理fastq数据的质控技巧

本文是Fastp实战指南,详细介绍了如何使用Fastp工具高效处理fastq数据的质控技巧。从数据清洗的必要性、基础命令解析,到高级参数定制、UMI数据处理及批量自动化流程,提供一站式解决方案。Fastp以其“All-in-One”的快速质控能力,帮助用户确保测序数据质量,为后续生物信息学分析奠定可靠基础。

weixin_29254029的博客 394

Unreal5 从入门到精通之 学习Niagara特效系统

UE5 Niagara粒子系统解析 Niagara是UE5中的高性能粒子特效系统,相比传统粒子系统具有完全可编程性和可视化节点编辑两大特点。核心单元发射器(Emitter)分为模板发射器(预设效果如喷泉、火焰)和空白发射器(高度自定义)。系统提供13种预设模板,包括吹飞粒子、五彩纸屑爆发、动态光束等常见特效。 Niagara采用三级模块化设计: 系统级:全局参数设置与更新 发射器级:控制粒子生成规则与行为 粒子级:处理单个粒子的生命周期和渲染 关键模块包括初始化粒子属性、物理模拟、颜色渐变等,支持GPU加速

TxNet 1137

[AXI]AXI3、AXI4 和 AXI5 的详细差异对比

AXI协议演进对比与AXI5原子操作应用 摘要:ARM的AXI总线协议从AXI3(AMBA3.0)到AXI5(AMBA5.0)持续演进。AXI4(2010)在AXI3基础上新增AXI4-Lite/Stream子协议,扩展事务ID至8位,突发长度增至256,并引入QoS和TrustZone支持。AXI5(2019)进一步强化,新增原子操作(如CAS)、增强安全机制,优化多核场景下的数据一致性。原子操作在多核同步、AI训练、汽车ADAS等场景发挥关键作用,通过无锁机制提升并发性能。验证时需重点测试并发访问下的数

元直的博客 3004

【MATLAB】STM32电机调速闭环控制工程

本文提出了一种基于MATLAB仿真与STM32实现的直流电机闭环PID调速控制方案。通过MATLAB建立电机数学模型并进行参数整定,仿真验证了增量式PID算法在启停、稳态和抗扰动方面的优越性能。基于STM32F103搭建了硬件系统,实现了编码器测速、定时中断控制、PWM输出等功能。实测表明,该系统转速超调<2%、稳态误差±2r/min,具备快速响应和强抗扰能力。相比开环控制,闭环调速显著提升了动态性能和稳态精度。方案提供了完整的仿真代码和嵌入式工程源码,可直接应用于智能小车、工业传动等场景,具有较高的

unber的博客 51

HTML音乐爱心3D旋转相册完整源码

HTML音乐爱心3D旋转相册完整源码

LilyCoder的博客 1380

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

win10 跳过U8环境检测的IE WebControls.rar

win10 安装u8的时候 提示IE WebControls 不通过,这个工具可以欺骗u8的检查。 跳过U8环境检测的IE WebControls。提示导入失败后,重新检测通过。

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

汉书HE8,好用的汇编代码编写工具

汉书HE8,好用的汇编代码编写工具早期编写汇编代码所用功能强大

上一篇: 《QT+PCL》点云配准NDT
下一篇: 《QT+PCL》点云配准进阶——GROR配准
小修勾
博客等级 码龄8年 6528粉丝 184原创
评论 3
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

小修勾

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值
⌂ 换网址