影像组学图像预处理

医学影像知识(二):医学影像常见数据预处理方式 医学图像数据分析是研究生物标记物并验证其准确性的过程,就像警察追踪嫌疑人一样,根据特征来识别目标并确认身份。这过程包括筛选特征以及验证结论的正确性。医学图像涵盖了病理图像、影像图像(如X光、CT扫描、MRI图像)和检验图像等。我们将重点介绍对影像图像的数据分析。比如,CT图像是由不同灰度构成的,医生通过观察图像上的异常特征来做出疾病诊断,比如肺癌病变通常呈现为肿块,具有特定的边缘特征。不过,这些特征通常是肉眼观察得出的。我们可以利用工具来提取更多特征,因为提取的特征越多,我们获得的判断证据也越充分。 阅读详情
AI摘要

本文介绍了如何使用Python和SimpleITK库对大文件夹中dicom格式的CT图像进行重采样,使其空间分辨率一致,并通过归一化和Z-score标准化消除亮度差异,统一图像特征。,

针对一个大文件夹以及子文件内所有的dicom格式图像

1.重采样,目的使空间分辨率一致

2.归一化(最大-最小值缩放):(x-min(x)) / (max(x)-min(x))

目的消除图像亮度差异,使像素值缩放到[0, 1]之间

3.Z-score标准化:(x-x(averge))/标准差

目的使图像具有统一的特征

import os
import SimpleITK as sitk
import numpy as np

 # 进行归一化和Z-score标准化处理
def normalize_and_standardize(image_array):
    # 归一化
    min_val = np.min(image_array)
    max_val = np.max(image_array)
    if min_val == max_val:# 以防出现归一化时分母为0
        normalized_array = np.zeros_like(image_array)# 如果相等,则将所有值设为0
    else:
        normalized_array = (image_array - min_val) / (max_val - min_val)
    # Z-score
    mean = np.mean(normalized_array)
    std = np.std(normalized_array)
    if std == 0:
        standardized_array = np.zeros_like(normalized_array)# 避免标准差为0而报错
    else:
        standardized_array = (normalized_array - mean) / std
    return standardized_array

CT_path = r'C:\Users\lyp\Desktop\CT0
影像组学分析流程中,图像分割前要做的事(图像预处理) 在InputVolume中无法找到自己想要重采样的序列,这时可以检查一下序列的Volume type是不是MRMLMulti。这时,Volume type将由MRMLMulti改为Scaler,随后即可在3D slicer中完成Resample Scaler Volume。2.1、重采样:通过3Dslicer中的Resample Scaler Volume实现。具体设置参数:spacing(1,1,1),Interpolation选择Bspline。2、图像预处理:重采样和标准化。 阅读详情

相关推荐

图像分割前预处理怎么做?影像组学特征可信度关键

在医学影像分析中,图像预处理是连接原始数据与后续算法之间的关键桥梁,其质量直接影响分割精度与特征提取的有效性。不同设备、不同中心采集的影像往往存在体素尺寸不一致、灰度分布不可比、噪声水平差异等问题,若未经过系统校正,后续提取的纹理特征或一阶统计特征将失去可比性,导致分析结果失真。通过体素重采样统一空间分辨率,利用偏置场校正修正MRI亮度不均,再结合灰度归一化或直方图匹配消除信号强度差异,能够将多源影像拉至同一起跑线。这些操作看似基础,却是影像组学研究中实现可重复性、保障上千个特征可靠性的根本前提。尤其在多中

weixin_29062255的博客 338

R语言-影像组学数据处理

使用R语言对影像组学数据进行处理 测试数据 library(caret);library(glmnet);library(pROC) set.seed(123456) data <- read.csv("data.csv", header = T) p.data <- preProcess(data[,-1],method = c("center","scale","corr")) P.data <- predict(p.data,newdata = data[,-1]) lass

dr_yingli的博客 5255

影像组学研究用R还是Python?从流程拆解到选型建议

在医学影像分析领域,选择合适的编程语言是科研入门的首要难题,而影像组学作为融合图像处理与统计建模的前沿方向,其技术栈选型尤为关键。影像组学研究并非单一任务,而是涵盖图像预处理、ROI分割、特征提取、特征筛选与建模验证的完整流水线。其中特征提取严重依赖Python生态中的PyRadiomics等工具,而后续的统计分析与生存分析则更契合R语言强大的glmnet、survival等包。理解这一分工逻辑,能帮助研究者根据自身项目所处阶段做出理性选择:偏图像侧选Python,偏统计侧选R。通过实际案例的技术栈对比,本

weixin_32063439的博客 58

GEE——影像的归一化和标准化处理

影像归一化:归一化是指将遥感影像的像素值转换到一个特定的范围内,例如[0,1]或[0,255]。这样做的目的是方便对不同影像之间的像素值进行比较和分析。常用的归一化方法有以下几种:1. 最大最小值归一化:将像素值除以影像中出现的最大值和最小值之差。2. 均值方差归一化:将像素值减去均值后除以标准差,使得像素值的平均值为0,方差为1。3. 百分比线性拉伸:将像素值线性转换到一定的百分比范围内,例如将影像中1%的像素值对应的输出值设为0,99%的像素值对应的输出值设为255。

此星光明博客 2665

Python医学图像深度学习平台实战:预处理、LSTM与强化学习全链路解析

医学图像处理涉及DICOM/NIfTI等格式,需经过窗宽窗位调整、重采样等预处理步骤,再结合CNN编码与影像组学特征提取,才能输入LSTM进行时序建模。强化学习则用于优化扫描策略或治疗决策。这套技术链路在病灶检测、随访预测等场景中价值显著。本文基于一份Python源码,详解从预处理到LSTM再到强化学习的完整实现与避坑指南。

weixin_29051811的博客 285

OpenVINS实战指南:从环境搭建到RGB-D相机实时建图

本文提供了一份详细的OpenVINS实战指南,涵盖从Ubuntu与ROS环境搭建、依赖安装与编译调试,到连接RGB-D相机进行实时建图的完整流程。重点解决了RealSense D435i等设备的驱动配置、话题对齐及常见问题,并分享了传感器标定与性能优化技巧,帮助开发者快速实现稳定高效的视觉惯性里程计系统。

weixin_29201313的博客 489

从充电管理芯片里‘偷师’:拆解一个PMOS双向开关电路,搞定你的固态继电器需求

本文深入解析了PMOS双向开关电路在固态继电器应用中的设计要点,重点探讨了防电流倒灌和高侧双向开关的实现技巧。通过拆解充电管理芯片中的PMOS背靠背结构,工程师可以构建高效可靠的固态开关方案,适用于智能硬件和电池管理系统。文章还提供了关键参数选择、电路优化建议及实测数据对比,助力解决电源防反接等工程难题。

weixin_33698043的博客 487

携程旅行网景区,评论数据爬虫项目数据库保存附源码

这是一个专门用于爬取某旅行网景区评论数据的Python爬虫项目。项目采用模块化设计,支持MySQL数据库存储,具备完整的异常处理机制和反爬虫策略。

ymqzhy的博客 2575

深入解析Android SoundTrigger架构:从HIDL到AIDL的演进与实践

本文深入解析Android SoundTrigger架构,从HIDL到AIDL的演进与实践。SoundTrigger是Android系统中低功耗语音唤醒的关键技术,通过分层设计和硬件协同实现高效语音识别。文章详细介绍了核心组件、HIDL与AIDL的对比及优化技巧,帮助开发者掌握语音模型优化和功耗管理。

brown的博客 234

手把手教你设计T型和Π型衰减器:从分贝计算到电阻选型全攻略

本文提供了一份T型和Π型衰减器的详细设计指南,涵盖从分贝计算到电阻选型的全过程。文章以50欧姆系统为例,通过公式推导和实例演示,手把手教你计算两种经典拓扑的电阻值,并深入探讨了电阻选型、误差控制及高频应用等关键实践技巧,帮助工程师和爱好者精准实现信号衰减与阻抗匹配。

blue42的博客 1347

AI摄影师:自动构图与修图算法设计

AI摄影师:自动构图与修图算法设计​ ,人工智能,计算机视觉,大模型,AI,AI 摄影师的核心能力体现在两方面:自动构图(通过算法优化画面元素布局)与智能修图(自动调整光影、色彩、细节)。例如,手机摄影中的 “AI 构图建议” 功能可实时框选最佳拍摄区域,修图软件中的 “一键增强” 能在 0.1 秒内完成专业级调色,这些都依赖于计算机视觉与深度学习的深度融合。

不踩坑,不知道坑有多深;不总结,踩过的坑白踩。 16万+

从0入门LocoTrack:6倍加速的SLAM追踪新范式实战指南

传统点追踪方法(如CorrTracker、TAPIR)在处理大规模场景或实时任务时,要么精度不足,要么速度太慢。而LocoTrack通过“局部4D相关性”和“Transformer全局关联”的创新设计,实现了精度与速度的双重突破速度:比现有SOTA方法快6倍,吞吐量高达数万点/秒;精度:在Kinetics、DAVIS等数据集上,定位误差显著低于传统方法;鲁棒性:能应对低纹理、动态场景等复杂环境,这是传统方法的“噩梦场景”。

m0_71589036的博客 99

Python库CloudScraper详细使用(绕过 Cloudflare 的反机器人页面的 Python 模块)

CloudScraper是一个专门用于绕过Cloudflare反机器人保护的Python库,它基于requests库构建,能够处理Cloudflare的5秒盾、WAF和人机验证等防护机制。

数据知道的博客 1万+

pscad IEEE标准系统搭建说明

pscad IEEE标准系统搭建说明,包含典型的IEEE 9节点、14节点、30节点、39节点和118节点系统。内含标准测试系统的原始数据和潮流结果。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

RU DOS版、EFI版32bit/64bit BIOS常用工具

DOS版、EFI版的RU工具,可用来查看IO、MEM、PCI、SMBIOS等资源。亲测在EFI SHELL下可用。

华为的C语言编程规范.pdf

华为技术有限公司内部技术规范。本规范制定了编写C语言程序的基本原则、规则和建议。从代码的清晰、简洁、可测试、安全、程序效率、可移植各个方面对C语言编程作出了具体指导。

下一篇: 影像组学提取全部特征
头不秃的医学僧
博客等级 码龄6年 38粉丝 4原创
评论 3
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值
⌂ 换网址