YOLOv13涨点改进 | 全网独家首发、Neck特征融合改进篇 | CVPR 2025 | YOLOv13引入ADWM自适应双重加权融合模块,有效优化特征的加权与融合,减少冗余并增强目标特征

一、本文介绍

🔥本文给大家介绍使用ADWM模块改进YOLOv13目标检测网络模型,能够有效优化特征的加权与融合,减少冗余并增强目标特征的表现,提升目标检测的准确性和鲁棒性,特别是在多尺度、小目标和复杂背景下。通过ADWM的引入,YOLOv13的性能将得到显著改善,适应性和准确性都能得到提升。

专栏改进目录:YOLOv13改进包含各种卷积、主干网络、各种注意力机制、检测头、损失函数、Neck改进、小目标检测、二次创新模块、HyperACE二次创新、独家创新等几百种创新点改进。

全新YOLOv13创新改进专栏链接:全新YOLOv13创新改进高效涨点+永久更新中(至少500+改进)+高效跑实验发论文

本文目录

一、本文介绍

二、ADWM自适应双重加权融合模块介绍

2.1 ADWM 模块结构图

2.2 ADWM 模块的作用:

2.3 ADWM 模块的原理

2.4 ADWM 模块的优势

三、完整核心代码

 四、手把手教你配置模块和修改task.py文件

1.首先在ultralytics/nn/newsAddmodules创建一个.py文件

2.在ultralytics/nn/newsAddmodules/__init__.py中引用

3.修改tasks.py文件

五、创建涨点yaml配置文件

🚀 创新改进: yolov13n_ADWM.yaml

六、正常运行


 

二、ADWM自适应双重加权融合模块介绍

摘要:目前,基于深度学习的遥感图像融合技术取得了快速进展。然而,许多现有方法未能充分利用特征的异质性和冗余性,从而限制了它们的有效性。我们利用协方差矩阵来建模特征的异质性和冗余性,并提出了相关性感知协方差加权(CACW)方法来进行调整。CACW通过协方差矩阵捕捉这些相关性,然后通过非线性函数处理生成权重进行调整。在此基础上,我们引入了一种通用的自适应双重加权机制(ADWM),从两个关键方面解决这些问题,提升现有深度学习方法的性能。首先,特征内加权(IFW)评估每个特征内部各通道间的相关性,减少冗余并增强独特信息。其次,特征间加权(CFW)根据层间的相关性调整各层的贡献,优化最终输出。大量实验表明,ADWM相较于现有最先进的方法表现出优越的性能。此外,我们通过泛化实验、冗余可视化、对比实验、关键变量和复杂性分析以

全新YOLOv11有效涨点改进专栏目录 | 本专栏持续更新500+篇内容 | 包含各种卷积、主干网络、各种注意力机制、检测头、损失函数、小目标检测改进、二次创新模块、独家创新等几百种创新点改进 YOLOv11专栏持续更新500+种创新改进方案,涵盖卷积优化、注意力机制、主干网络、Neck特征融合、检测头、小目标检测等核心模块。提供独家创新点组合方案、模型轻量化改进及最新Mamba架构融合技术,配套完整实验代码和训练参数解析。订阅用户可加入专属答疑群,获取一键运行项目支持。专栏包含YOLOv11网络结构详解、配置文件解读等入门必读内容,助力科研论文发表与模型性能提升。限时开放订阅通道,提供多种涨点改进方案组合,满足不同研究需求。 阅读详情

相关推荐

AI编程实战:YOLO11道路坑洼检测实战,从数据集准备到模型训练与结果分析(附完整Prompt)

Prompt 9:使用 best.pt 进行检测现在我已经完成 YOLO11 道路坑洼检测模型训练。训练得到的最佳权重文件路径为:xxxxxx请根据当前项目实际路径,帮我编写一个自定义模型图片检测脚本。要求:1. 加载刚刚训练得到的 best.pt;2. 支持指定单张图片进行检测;3. 支持指定图片文件夹进行检测;4. 使用 YOLO11 目标检测接口;5. 保存检测结果;6. 输出检测结果图片的保存路径;7. 不要修改原始图片;

在职AI算法工程师,擅长计算机视觉,YOLO目标检测、分割等,擅长web、pyqt界面可视化,好内容持续更新中,来这里跟大家一起学习,共同进步 59

YOLO训练调优与问题诊断实战,从损失震荡到mAP异常的全链路排查

本文系统梳理YOLO训练中的常见问题,构建从现象到根因的诊断框架,涵盖损失不降、mAP异常、震荡与NaN等典型故障。通过监控梯度范数、正样本分布、特征图等关键信号,结合控制变量法,精准定位数据标注、学习率、增强策略、优化器配置等问题。重点解析学习率调度、梯度裁剪、EMA、混合精度训练等调优技巧,提供可复用的排查checklist与PyTorch监控代码,助力实现高效、稳定的模型训练。

QQ_778132974的博客 29

1080P 画面里的安全扣只有 12px,YOLO26 检不出?切片推理与训练尺度一篇讲透

本文详解小目标检测难题,通过SAHI切片推理实现高精度检测。针对“整图mAP高但小目标AP低”问题,提出切片推理、坐标还原、重叠合并与级联提速方案,结合分桶评估验证效果。对比四种技术路线,推荐离线场景用切片训练+推理组合,实时监控采用级联策略。附完整可运行代码,涵盖SAHI库调用与无依赖自写实现,含8条踩坑总结,助力快速落地。

王大师企业官方博客 1057

5分钟搞定!用L型匹配电路优化窄带天线性能(附Smith圆图实操)

本文针对窄带天线阻抗匹配难题,提供了一套5分钟快速解决方案。通过详解L型匹配电路的核心原理,并结合Smith圆图这一射频工程师的“瑞士军刀”,手把手指导如何选择拓扑、计算元件值并进行实际调试,旨在帮助硬件工程师高效优化天线性能,实现最大功率传输。

yyy34的博客 450

YooAsset 2.2.12四层加密架构:跨平台资源安全实战指南

AssetBundle加密是Unity热更新安全的核心环节,其本质是通过算法、密钥管理与生命周期协同实现资源全链路防护。传统方案常陷于‘打包后加密’的误区,导致内存开销大、跨平台兼容差、逆向防护弱。YooAsset 2.2.12提出打包层、传输层、加载层、运行层四层防护架构,将加密前置到资源序列化前,并依托BundleHeader实现动态算法协商与密钥分发,显著提升iOS/Android/WebGL三端一致性。该方案兼顾AES-128等通用算法与SM4等国密支持,同时通过IMemoryDecryptor实现

weixin_32428571的博客 417

推荐系统(1):推荐系统评测

对于可以离线优化的指标,我个人的看法是应该在给定覆盖率、多样性、新颖性等限制条件下,尽量优化预测准确度。用一个数学公式表达,离线实验的优化目标是:最大化预测准确度使得 覆盖率 > A多样性 > B新颖性 > C其中,A、B、C的取值应该视不同的应用而定。

数据不会骗人 2528

R语言孟德尔随机化环境搭建:手把手教你搞定gwasvcf、gwasglue等包的安装报错(附本地安装包)

本文详细介绍了R语言中孟德尔随机化环境搭建的全流程,重点解决gwasvcf、gwasglue等包的安装报错问题。从依赖关系解析到GitHub访问配置,再到离线安装方案,手把手教你搭建完整的分析环境,特别适合生物信息学新手快速上手。

weixin_29093017的博客 218

XMind文件解析黑科技:用Python实现版本自适应读取(兼容2010-2024)

本文深入探讨了如何利用Python实现XMind文件的版本自适应解析,兼容从2010到2024年的各版本。通过分析XMind文件作为ZIP压缩包的本质,文章提供了智能探测文件内部结构(JSON或XML)并构建健壮读取逻辑的完整方案,有效解决了版本兼容性难题,并演示了将解析数据转换为PlantUML等下游应用的实战案例。

weixin_29041767的博客 687

AI上推荐 之 多任务loss优化(自适应权重篇)

1. 写在前面 在多任务学习中,往往会将多个相关的任务放在一起来学习。例如在推荐系统中,排序模型同时预估候选的点击率和浏览时间。相对于单任务学习,多任务学习有以下优势: 多个任务共享一个模型,占用内存量减少; 多个任务一次前向计算得出结果,推理速度增加; 关联任务通过共享信息,相互补充,可以提升彼此的表现。 前面的一篇文章,主要是从模型结构的角度聊了下多任务学习,介绍了工业界非常经典也常用的MMOE模型,然而,对于多任务学习, Loss的优化也非常重要, 因为我们知道通过多个目标去指导网络进行统一的训练

Miracle8070 1万+

Python 爬虫实战:科研数据库学术论文数据抓取

在科研工作中,学术论文是获取前沿知识和研究方法的重要资源。然而,手动从科研数据库中查找和整理论文信息往往耗时费力。幸运的是,Python 爬虫技术可以自动化这一过程,帮助我们高效地抓取和管理学术论文数据。本文将详细介绍如何使用 Python 爬虫技术抓取科研数据库中的学术论文数据,并进行全字段提取和文献管理,助力科研工作。

u014481728的博客 952

Linux V3H 平台开发系列讲解(摄像头)2.3.1 MAX96912 MAX96717 GMSL1 CSI 2lane配置

​ 单路摄像头,数据流类型YUV422, mipi接口,经过MAX96717 串行器,gmsl1链路 到解串器MAX96712,最后mipi csi 2lane(lane0 lane1)输出到 renesa v3h soc开发板; ​

xian18809311584的博客 580

精雕软件(JDpaint) 5.5 绿色版

精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

pscad IEEE标准系统搭建说明

pscad IEEE标准系统搭建说明,包含典型的IEEE 9节点、14节点、30节点、39节点和118节点系统。内含标准测试系统的原始数据和潮流结果。

上一篇: YOLOv12涨点改进 | Conv篇/小目标改进 | AAAI 2025 两个轻量级FCM和MKP模块, FBRT-YOLOv12助力无人机航拍任务,小目标检测,遥感目标检测有效涨点
下一篇: YOLOv11涨点改进 | 全网独家首发、Neck特征融合改进篇 | CVPR 2025 | YOLOv11引入ADWM自适应双重加权融合模块,有效优化特征的加权与融合,减少冗余并增强目标特征
Ai缝合怪 博士
博客等级 码龄7年 2980粉丝 1907原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值
⌂ 换网址