Open3D 点对点的ICP配准算法【2025最新版】
本文详细介绍了Open3D中的点对点ICP配准算法原理,包括配准流程、关键函数及代码实现,并展示了配准前后的结果。通过迭代修正点云的刚体变换,最小化点对之间的距离,实现点云的精确配准。
当前文章被以下社区和专栏收录:
本文详细介绍了Open3D中的点对点ICP配准算法原理,包括配准流程、关键函数及代码实现,并展示了配准前后的结果。通过迭代修正点云的刚体变换,最小化点对之间的距离,实现点云的精确配准。
Open3D 点云配准:ICP算法详解与实现
在本文中,我们将介绍一种常用的点云配准算法——迭代最近点(Iterative Closest Point,简称ICP)算法,并使用 Open3D 库进行实现。通过使用 Open3D 提供的接口,我们可以方便地进行点云配准,并且可以根据需要进行更多的扩展和优化。最近点搜索(Matching):对于参考点云中的每个点,寻找目标点云中距离最近的点,并建立二者之间的对应关系。变换估计(Estimation):根据匹配得到的点对,估计一个变换矩阵,将目标点云变换到参考点云的坐标系下。在上述代码中,我们首先使用。
Open3D 点云配准(ICP):实现精确的三维模型对齐
点云数据是三维空间中大量离散点的集合,它们可以通过三维扫描设备或者摄像头采集得到。点云配准的目标是找到两个或多个点云之间的最佳变换矩阵,使得它们在空间中对齐。ICP 算法是一种常用的点云配准方法,它通过迭代的方式不断改善点云的对齐效果。本文介绍了如何使用 Open3D 库进行点云配准。通过实现 ICP 算法,我们可以将多个点云数据集对齐到一个统一的坐标系中,从而方便后续的三维重建和计算机视觉任务。希望本文能够对您在点云配准方面的工作有所帮助!
Open3D 点到面的ICP配准算法【2025最新版】
点到面的ICP(python版本)博客长期更新,本文最近一次更新时间为:2025年2月2日,代码已更新至Open3D 0.18.0版本。
Open3D 多幅点云配准【2025最新版】
多幅点云配准,博客长期更新,本文最近一次更新时间为:2025年2月3日。
Open3D 使用CPD算法对点云配准【2025最新版】
Coherent Point Drift相干点漂移算法实现点云配准(python代码)博客长期更新,本文最近更新时间为:2025年2月2日。
Open3D(C++) ICP算法实现点云精配准【2026最新版】
使用C++版本的Open3D实现点到点的ICP精配准算法。算法原理可参考:一种利用地理实体目标特征的道路场景激光点云配准方法[J/OL].中国激光:1-20[2022-08-17].http://kns.cnki.net/kcms/detail/31.1339.tn.20220714.1202.010.html...
Open3D 使用GICP对点云配准【2025最新版】
Generalized-ICP算法的open3d代码实现,博客长期更新,本文最近一次更新时间为:2025年2月3日。
Open3D(C++) 点到平面的ICP算法实现点云精配准【2026最新版】
使用C++版本的Open3D实现点到平面的ICP算法实现点云精配准
Open3D 彩色点云配准【2025最新版】
彩色点云配准,博客长期更新,本文最近一次更新时间为:2025年2月18日,代码已更新至Open3D 0.18.0版本。
Open3D 鲁棒损失函数优化的ICP算法【2025最新版】
鲁棒损失函数优化的ICP算法,博客长期更新,本文最近一次更新时间为:2025年12月15日。
【2026最新版】Open3D(C++)点云处理算法汇总(C++长期更新版)
C++版本Open3D进行点云处理的一些算法使用案例。博客长期更新,最近一次更新时间为:2026年4月11日。
Open3D ISS关键点提取【2025最新版】
ISS关键点提取,博客长期更新,本文最近一次更新时间为:2025年9月21日。
Open3D 可视化(6) ——交互式可视化【2025最新版】
Open3D 交互式可视化,博客长期更新,本文最新更新时间为:2025年4月17日。
Open3D(C++) ColoredICP彩色点云精配准【2026最新版】
C++版本Open3D实现Park J , Zhou Q Y , Koltun V . Colored Point Cloud Registration Revisited[C]// IEEE International Conference on Computer Vision. IEEE Computer Society, 2017.一文中提出的彩色点云精配准方法。
Open3D 进阶(36)4PCS算法实现点云粗配准
4PCS算法是一种基于仿射不变性的全局点云配准方法,适用于初始位姿未知、低重叠度或含噪声的点云数据。其核心思想是通过寻找共面的四点基,利用仿射不变比率建立对应关系,计算最优刚体变换。该算法对初始位姿不敏感且能处理低重叠数据,但计算复杂度较高。代码实现包括点云预处理、四点基搜索、仿射不变性计算、变换矩阵估计等步骤,适用于考古重建、大场景三维重建等需要初始对齐的场景。算法先进行粗配准,为后续精配准提供良好初始估计。
Open3D 可视化(5) ——非阻塞可视化【2025最新版】
动态显示ICP配准的整个过程。博客长期更新,本文最新更新时间为:2025年4月17日。
Open3D(C++) 4PCS算法实现点云粗配准
4PCS算法是一种基于仿射不变性的点云配准方法,适用于初始位姿未知、低重叠度的点云数据。其核心思想是通过寻找共面的四点基,利用仿射不变比率建立对应关系,计算最优刚体变换。该算法具有对初始位姿不敏感、能处理低重叠度数据的优点,但计算复杂度较高。代码实现主要包括寻找四点基、计算仿射不变比率、匹配候选点集等步骤,最后通过SVD分解计算变换矩阵。该算法适用于全局粗配准,为ICP等精配准提供初始估计。
ANSYS Products19.1下载及安装教程
ANSYS Products19.1下载及安装破解教程 前言 ANSYS软件是美国ANSYS公司研制的大型通用有限元分析(FEA)软件,是世界范围内增长最快的计算机辅助工程(CAE)软件,能与多数计算机辅助设计(CAD,computer Aided design)软件接口,实现数据的共享和交换,如Creo, NASTRAN、Algor、I-DEAS、AutoCAD等。ansys project包括一整套的软件集合,它耦合了CFD模型的前处理,求解器和后处理所需要的相关软件,特比是它的workbench模块,
GPU八卡A100使用INT4-W4A16量化大模型实验
本实验旨在探索在环境下,对大语言模型进行权重量化的可行性、效率与性能影响。通过采用工具集成 GPTQ 算法,实现对所有线性层的权重量化(W4A16 方案最终通过lm-eval工具在GSM8K任务上对压缩模型进行评估。
从数据校准到论文呈现:fsQCA与NCA方法融合的完整实证研究指南
本文详细介绍了fsQCA(模糊集定性比较分析)与NCA(必要条件分析)方法融合的完整实证研究流程,从数据校准到论文呈现。通过软件操作技巧、R语言NCA包高效使用及论文写作规范,帮助研究者避免常见误区,提升研究质量与可靠性。特别适合需要进行组态分析的研究生和学者参考。
ThingsBoard入门实战(七):公共发布和 UI 细节修改
公共发布和 UI 细节修改7.细节修改和公共发布一、公共发布二、UI优化下载运行修改三、下一步还可以做什么?更好的UI更丰富的系统模块 7.细节修改和公共发布 GET到新技能了,想给兄弟们演示,需要给他们每个人一个账号么? 答案肯定是:不需要! ThingsBoard 用 公共发布 解决了这个问题。 一、公共发布 首先我们来看一下路灯设备现在在谁名下? 如下图,路灯都是customerA的, 目前只有它和它的租户可以看到,其他人需要看就需要设为公有。 如图操作: 对于设备详情仪表盘,我们也需要设为公有
PCIE Lane Margining Linux 环境配置
Copy all the provided files in folder PYC38 or PYC310 to the created pcie_lmt folder. Index of /ftp/python/3.8.10/Copy below commands to a file and rename it as "scan_pcie.py", the commands are from "685662 PCIe-LMT-Gen4_Gen5-r0p77.pdf" in the lane margi
SAP PCE私有云MM02修改物料主数据基本单位报错
当前发现只有改为AAAADL(无量纲)单位时会报错,其他的正常。一开始以为配置的ISO码换算有问题,对配置排查后,排除配置问题。最后发现是PCE当前版本的原因,需要打上NOTE。SAP PCE私有云在没有库存和业务单据的情况下,MM02修改物料主数据基本单位报错“EA CPZP MK000000000000:PCS 不可转换为”,详见截图。点击【显示错误】,提示EA CPZP MK000000000000:PCS 不可转换为。从SAP FOR ME下载NOTE 3531359,链接。
Flink SQL数据血缘实战:如何用Calcite追踪字段级数据流向(附源码示例)
本文深入探讨了如何利用Apache Calcite解析Flink SQL执行计划,实现字段级数据血缘的追踪。通过扩展Calcite的元数据处理器,特别是针对Flink特有的Snapshot等节点,文章提供了从获取优化后的逻辑计划到提取并可视化血缘关系的完整实战方案,并附有核心源码示例,帮助开发者构建实时数仓的数据治理能力。
CKS-CN考试之路----11
显然是alpine-b的镜像有libcrypto3-3.1.4-r5。新版本发布老版本会被回收,此时pod只剩下2个container。我们依次测试是哪个镜像里包含libcrypto3。可以看到alpine的pod有3个副本.
文档:亲测可用解决vnc灰屏,黑屏,鼠标大黑叉情况
主要解决vnc-viewer灰屏,黑屏,鼠标大黑叉等现象,详细见文档。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
TMS_WebGMaps_1.9.8.0_Full_Source
TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder
2万+
9128
1442

被折叠的 条评论
为什么被折叠?



