【详细】芯片设计全流程(包括每个流程需要用到的工具以及需要参与的工作人员)

VIP【详细】芯片设计全流程(包括每个流程需要用到的工具以及需要参与的工作人员)
一颗芯片的诞生经历了设计、制造和测试(分别对应集成电路产业链的设计业、制造业和封测业),而每一步都包含了复杂的步骤和流程。图0-1 集成电路产业链现在,我们重点介绍芯片设计的全流程以及每个流程需要用到的设计工具和需要参与的工作人员。一、IC设计分类首先对IC设计的分类做个介绍,如图1-1所示。图1-1 IC设计分类如图1-1所示,IC设计可以粗分为数字IC设计和射频/模拟IC设计,数字IC设计又可分为ASIC设计和FPGA/CPLD设计,此外还有一部分IC设计.
开通可读全文 ·8.8w 人阅读
最低0.47元/天 解锁文章

 IC设计流程图全览

 


 一颗芯片的诞生经历了设计、制造和测试(分别对应集成电路产业链的设计业、制造业和封测业),而每一步都包含了复杂的步骤和流程,如图0-1所示。

图0-1 集成电路产业链

现在,我们重点介绍芯片设计的全流程以及每个流程需要用到的设计工具和需要参与的工作人员。


一、IC设计分类

首先对IC设计的分类做个介绍,如图1-1所示。

图1-1 IC设计分类

如图1-1所示,IC设计可以粗分为数字IC设计和射频/模拟IC设计;数字IC设计又可分为ASIC设计和FPGA/CPLD设计;此外还有一部分IC设计采用数模混合设计,如:SOC设计和数模混合信号IC设计。

关于数字IC中的ASIC与FPGA/CPLD的区别:

  • ASIC(Application Specific Integrated Circuit,专用集成电路):需制作掩模,设计时间长,硬件不能升级;芯片面积小,性能可以得到较好的优化;适合芯片需求量大的场合:片量用于平摊昂贵的光罩掩模制版费,降低单片生产成本。
  • FPGA/CPLD(Field Programmable Gate Array,现场可编程门阵列 / Complex Programmable Logic Device,复杂可编程逻辑器件):不需要后端设计/制作掩模,可编程;开发门槛较低,设计时间较短,可方便和快速地升级优化硬件;芯片面积大,性能不够优化 ;适合芯片需求量小的场合:不用支付昂贵的光罩掩模制版费。作为数字ASIC设计流程中的必要步骤:ASIC设计中前端设计的FPGA
VIP 【验证通识】芯片设计全流程 芯片设计全流程,这块内容可以不深入,但不能不知道 开通可读全文·7.9k 阅读·12 点赞·57 收藏 阅读全文

相关推荐

数字IC设计(ASIC设计)完整流程详解

目录 I、ASIC设计流程 一、确定项目需求 二、前端流程 三、后端流程 II、IC设计流程相关名词梳理(含各流程EDA工具梳理) III、IC设计流程整理(图片) I、ASIC设计流程 一、确定项目需求 1. 确定芯片的具体指标: 物理实现 制作工艺(代工厂及工艺尺寸); 裸片面积(DIE大小,DIE由功耗、成本、数字/模拟面积共同影响); 封装(封装越大,散热越好,成本越高)。 性能指标: 速度(时钟频率); ...

weixin_42294124的博客 4万+

数字芯片工作流程

数字芯片工作流程如下图所示,确立项目之后分为前端和后端两部分,其实也没这么硬性要求区分,只不过行业这么都这么叫而已。

悟已往之不谏,知来者之可追。 1419

芯片设计流程中常用EDA工具

在芯片设计流程中,使用多种专门的EDA(Electronic Design Automation)工具来辅助各个环节的工作。

MHD0815的博客 3261

芯片设计流程概述

芯片设计分为前端设计和后端设计,前端设计(也称逻辑设计)和后端设计(也称物理设计)并没有统一严格的界限,涉及到与工艺有关的设计就是后端设计。 1. 规格制定 芯片规格,也就像功能列表一样,是客户向芯片设计公司(称为Fabless,无晶圆设计公司)提出的设计要求,包括芯片需要达到的具体功能和性能方面的要求。 2. 详细设计 Fabless根据...

aozunling4867的博客 2651

一文看懂芯片的设计流程

数字芯片设计流程解析 本文详细介绍了数字芯片设计的主要流程,分为规格定义、系统设计、前端设计和后端设计四个阶段。规格定义阶段需明确芯片功能需求;系统设计阶段由架构工程师确定实现方案;前端设计包括HDL编码、仿真验证和逻辑综合;后端设计则完成物理布局、验证和签核检查。整个设计过程采用"自顶向下"思路,贯穿大量验证环节,最终输出GDSⅡ版图文件交晶圆厂流片。文章特别强调芯片设计过程中验证的重要性,以及需要考虑制造工艺约束等实际问题,确保设计准确性和可实现性。

smartvxworks的博客 1792

基于STM32控制直流电机加减速正反转仿真设计

*单片机设计介绍,基于STM32控制直流电机加减速正反转仿真设计。

2201_75940997的博客 1607

Unity类银河恶魔城学习记录1-10 PlayerWallJump源代码 P37

Alex教程每一P的教程原代码加上我自己的理解初步理解写的注释,可供学习Alex教程的人参考

Homura_的博客 1385

Windows下Python调用D435i相机避坑指南:从SDK版本选择到RealSense Viewer报错解决

本文详细介绍了在Windows环境下使用Python调用Intel D435i相机的完整避坑指南。重点解决了SDK版本选择问题,推荐使用稳定的Intel RealSense SDK 2.54.2版本,并提供了从环境配置、常见报错解决到实际应用案例的全流程实践指导,帮助开发者高效完成相机部署与开发。

palm99的专栏 926

WPS制作甘特图实操(带图超详细)

一、数据准备 图1 二、添加公式 在表格的E3处添加公式:=IF(C3>=G3,0,IF(C3+D3>=G3,G3-C3,D3)),点击该单元格的右下角。使鼠标箭头变“+”后下拉拖拽,复制该公式。F3处的公式为:=D3-E3,使用相同的拖拽方式复制公式应用,操作完毕如下图3. 图2 图3 三、插入图表 1、选中方框1内容,按住ctrl按键,继续选择2、3列的内容,点击插入全部图表中的条形图,选择2对应的图标样式,生成图6的样式。 点击图6中的3标尺,右击选择数据弹出图8,点击+号选择表格中

m0_49047167的博客 3万+

MATLAB对pcap文件抓包的读取

应用范围 常用的雷达信号,无线网通信信号的格式大多为pcap、wj文件,这里记录一下MATLAB读取pcap文件的方法,具体处理过程及读取协议针对不同的雷达有不同的处理方式,在这里不做说明。 程序 clc;clear;close all; %% 文件位置 filename= 'E:\File\JOB\JOB_1\data.pcap'; fid = fopen(filename,'r'); % 打开包 tmpPack = fread(fid,1350); % 只读前1350个数 读到

诗酒趁年华的博客 3582

matlab 基于离散余弦变换DCT的最小二乘相位解缠

最小范数法是寻求在解包裹相位的局部微分与包裹相位微分相一致的条件下, 逼近于真实相位分布的解包裹相位分布。目标是使解包裹相位与包裹相位曲面的差最小

点云侠的博客 285

RK3568-适配phy芯片ip101gri

复位时间查阅数据手册。

Paper_Love的博客 2647

【Altium Designer】Off grid pin解决方法

​今天我画完原理图编译时,出现了太多的黄色(出现warning警告提示)Off grid pin警告,这个警告并不是原理图电气连接出问题了,而是元器件或器件PIN脚没有和栅格对齐造成的原因。再编译还是出现这个警告。 最后经过不断翻阅网上经验和实践,才最终解决,本经验详细记录了解决该警告的有效方法。 解决方案:以下是问题解决步骤... ​

夜半少年的博客 7554

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术,以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索,主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式,计算机控制系统的数学描述与基本分析方法,以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

霍尼韦尔SoftMaster使用说明

霍尼韦尔SoftMaster使用说明

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

上一篇: 数字IC设计工程师笔试面试经典题
下一篇: 集成电路技术与产业发展
Cheeky_man
博客等级 码龄10年 2003粉丝 142原创
评论 4
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

Cheeky_man

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值
⌂ 换网址