艾德克斯电子负载IT8510维修

电子负载维修避坑指南:IT8510电压跳动故障排查与EC11编码器替换实战 本文详细记录了艾德克斯IT8510电子负载电压跳动与恒流失效故障的排查与修复全过程。通过由外向内逐步诊断,定位到负电源异常与EC11编码器损坏两大核心问题,并分享了安全拆焊、元件替代(如EC11编码器替换)与环氧胶固定等实战技巧,为工程师维修同类设备提供了宝贵的避坑指南。 阅读详情
AI摘要

分享作者如何修复一台使用多年的艾德克斯电子负载,遇到空载电压跳动和编码器失效的问题。通过拆解、检测和替换编码器,展现了维修过程和最终解决方案。

前言        

        2年前从朋友那收了这台艾德克斯电子负载,收来的时候上面的编码器就不好用,就是旋转的时候一会增加一会减小这种现象,不过其他功能都是正常的,自己也就将就用这。直到昨天,电子负载开机发现空载的时候电压不是0,开始有mV级的跳动,心想这个不正常。又测试了一下恒流功能,已经不能正常工作了。

行动

        这台电子负载是我使用非常频繁的工具之一,于是赶紧下单买了台IT8511A+ ,1500元。这台坏的呢?试试修复下吧,如果能修好就非常好了,因为又很多情况下有两台电子负载会方便很多。电子负载大概的原理我是知道的,于是开始动手。

拆机

1,拆下这4可螺丝,仪表的盖子就可以取下来了 

 2,取前面板,这个转动的把手必须取下来才行,取消来的技巧就是下图两个符号对上,往外一拉就可以了。

艾德克斯电子负载IT8510故障排查与修复实战 本文详细介绍了艾德克斯电子负载IT8510的故障排查与修复过程,重点分析了空载电压异常和编码器失灵两大常见问题。通过拆机检查、灰尘清理和编码器更换等实战步骤,成功修复设备并分享维修经验与技巧,为电子负载维护提供实用指南。 阅读详情

相关推荐

标准小知识3一一直流电子负载

电子负载

Cilcre的博客 3632

拆解FZ25电子负载:聊聊那些藏在保护机制里的硬件设计“小心思”

本文深入拆解FZ25电子负载的保护机制,揭示其硬件设计中的精妙之处。从防反接保护到多重保护电路的协同设计,再到散热细节的优化,FZ25在成本与可靠性之间实现了巧妙平衡。文章还探讨了从消费级到工业级的改进思路,为电子负载设计提供了实用参考。

weixin_30635053的博客 207

13年老设备重生记:手把手教你修复艾德克斯IT8510电子负载(附编码器更换指南)

本文详细记录了修复一台服役13年的艾德克斯IT8510电子负载的全过程。针对空载电压跳动和编码器失灵两大典型故障,文章提供了从系统性诊断、安全拆解到核心元件更换的完整指南,并重点分享了非标准编码器的测绘、选型与焊接替代方案,旨在帮助工程师和爱好者掌握老旧仪器的维护思路,实现设备重生。

weixin_29305337的博客 334

拆个旧节能灯,实测MJE13001三极管参数,聊聊它为啥是充电器里的‘常青树’

本文通过拆解废旧节能灯,实测MJE13001三极管参数,探讨其在充电器设计中的持久价值。MJE13001凭借设计冗余度、低成本和高可靠性,成为低功率开关电源的经典选择,至今仍广泛应用于电蚊拍、小夜灯等产品。文章还提供了安全拆解步骤、参数测量及替代方案,展现其工程智慧。

weixin_42526015的博客 124

简易电子负载原理图DIY

简易电子负载原理图DIY

Applied Energy期刊小白论文投稿模板-流程经验分享

Applied Energy期刊小白论文投稿模板-流程经验分享,Elsevier期刊(爱思唯尔)投稿流程

zzu_Flyer的博客 4万+

基于8086微机原理数字钟计时器系统设计

*单片机设计介绍,基于8086微机原理数字钟计时器系统设计。

2201_75940997的博客 1284

2021-10-29【微生物】丨基于qiime2工具16S/ITS分析全套流程(上)

目录摘要工具与方法使用命令结果展示总结二级目录三级目录 摘要 前两个月项目特别多,最近终于有机会闲下来写点文章,把之前搭建的流程梳理一遍。前同事分析16S/ITS使用的qiime1,我接手后感觉不太适应,希望能够使用新版本来搭建,于是花了几天时间重新搭了这个流程, 工具与方法 使用工具:qiime2 使用版本:qiime2-2021.4 参考文档:https://docs.qiime2.org/2021.4/(最新版本2021.8) 使用命令 在这里插入代码片 结果展示 总结 二级目录 三级目录 ...

1万+

基于深度学习的X光安检危险品检测系统(YOLOv8 + UI界面 + 数据集)

随着全球安全形势的变化,机场、车站、地铁等场所的安检工作日益重要。X光安检系统已经成为现代公共安全领域中不可或缺的部分,能够有效地检测物品的内部结构,识别潜在的危险品。然而,传统的X光图像分析方法仍然依赖人工操作,检测效率较低,并且易受到人为因素的影响。近年来,深度学习技术的应用在图像分析领域取得了显著的突破,特别是在目标检测任务中,YOLO(You Only Look Once)模型因其高效性和精度,成为了许多目标检测任务的首选模型。

YOLO 1062

从零开始用 C# 打造工业级上位机系统:完整项目实战

本文介绍了一个基于C#开发的工业级上位机系统项目。该系统采用分层架构设计,包含通信、数据采集、UI展示、告警日志等模块,支持Modbus协议和串口通信。文章详细阐述了系统架构设计、关键模块实现(如Modbus通信封装、实时数据采集、告警系统等)以及性能优化策略。该项目已在实际工控场景中稳定运行超过1年,具备良好的可扩展性和稳定性,适合有一定C#基础的开发者参考学习工业软件开发实践。

这里只有干货:从 Modbus 通信到 MES 对接,从 YOLO 训练到工控机部署,带你搞定工业软件开发全流程。 1374

《Autosar从入门到精通-实战篇》总目录_培训教程持续更新中...

欢迎大家订阅《Autosar从入门到精通-实战篇》,下方整理了相关博文的目录(单击蓝色字体即可跳转),方便大家获取。 本专栏旨在:扫除Autosar工具链配置过程中的障碍,加深对Autosar理论的理解。 温馨提醒: 如有疑问,可在博文的“评论区”给小编留言,进行技术交流(评论区开启了验证功能,审核通过后,会显示); 如有疑问,也可以通过博文中的第一个图片联系小编,获取专栏/博文的实时状态; 由于工作限制,仅做个人技术交流。添加好友时,请备注您的“姓名-公司-职务...

「汽车电子助手」的博客 12万+

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

文档:亲测可用解决vnc灰屏,黑屏,鼠标大黑叉情况

主要解决vnc-viewer灰屏,黑屏,鼠标大黑叉等现象,详细见文档。

visio安装包

Microsoft Office Visio 是一款专业的制图软件。利用经过更新的形状、协作工具和数据链接图表,创建专业级图表以简化复杂的信息。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

上一篇: MCU优先级问题引起的一个BUG
下一篇: BQ2060 修复方法
mainbanp
博客等级 码龄14年 1653粉丝 210原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值
⌂ 换网址