FR4板材实战:用ADS 2023快速设计微带线低通滤波器(附Line-Cal计算技巧)

关于ADS板材外出加工的方法 01 ADS layout导出DXF文件 阅读详情

FR4板材实战:用ADS 2023设计1-3GHz微带线低通滤波器的工程技巧

在射频电路设计中,微带线滤波器因其结构紧凑、易于集成等特点,成为1-3GHz频段的主流选择。FR4作为最常见的PCB基板材料,虽然介电常数稳定性不如高频专用板材,但凭借成本优势和良好的机械性能,依然是许多消费电子和工业设备的首选。本文将分享如何利用ADS 2023的Line-Cal工具快速完成FR4板材上的微带线低通滤波器设计,特别针对介质损耗和阻抗匹配等实际问题提供解决方案。

1. FR4板材特性与设计考量

FR4板材在1-3GHz频段会表现出明显的介质损耗和色散效应。实测数据显示,普通FR4的损耗正切(tanδ)在1GHz时约为0.02,到3GHz时会升至0.025左右。这意味着在设计滤波器时需要考虑以下因素:

  • 介电常数变化:FR4的εr通常在4.3-4.5之间,但会随频率升高略有下降
  • 铜箔粗糙度影响:1oz铜箔的表面粗糙度会导致额外0.1-0.2dB/inch的插入损耗
  • 厚度选择权衡:
    厚度(mm) 优点 缺点
    0.8 适合紧凑设计,线宽较小 损耗较高,加工精度要求高
    1.6 损耗较低,机械强度好 线宽较大,占用面积大

提示:在ADS材料库中创建自定义FR4参数时,建议将介电常数设为频率相关模型,可参考以下公式:

er_
基于ADS与FR4板材的微带低通滤波器设计与优化实战 本文详细介绍了基于ADS软件与FR4板材的微带低通滤波器设计与优化全流程。从集总参数原型设计到微带线实现,结合ADS的LineCalc工具进行精确计算,并分享版图验证与加工注意事项,帮助工程师掌握射频电路设计中的关键技术与优化方法。 阅读详情

相关推荐

ADS实战:从MSub控件快速提取FR4板材参数

本文详细介绍了在ADS软件中,如何从原理图的MSub控件快速提取FR4板材参数并创建标准板材文件的方法。通过实战步骤演示,帮助射频工程师高效复用已验证的板材设置,避免手动输入错误,确保设计源头数据的一致性与准确性,从而提升高频电路设计效率。

weixin_29284657的博客 338

使用微带线设计一个低通滤波器

1.首先设计一个集总参数的滤波器,并观察其性能,如下: 观察可以看到其1.2Ghz回损最好,我们就以1.2Ghz为参考频率设计一个微带滤波器; 2. 在0.8mm厚的FR4板上,以1.2Ghz为参考频率,设计一个取代集总元件的微带低通滤波器; 由ADS的line-cal软件可以计算出,对应的20欧姆,50欧姆,100欧姆的微带线宽度及波长。在根据直接介绍的,如何设计微带电容,微带电感的方法设计对应的集总器件; 微带电容设计可以参考该链接:https://blog....

rzchong1988的专栏 1万+

FR4板材微带线低通滤波器实战:ADS 2023与Line-Cal设计全流程

射频电路设计中,板材选择与阻抗控制是基础。FR4因其成本低、加工周期短,在消费级无线产品与物联网模块中得到广泛应用,但其介电常数随频率变化、损耗正切较大,需要借助精确计算与仿真工具加以控制。微带线通过高低阻抗线等效电感与电容,可实现结构紧凑的低通滤波器拓扑。ADS 2023中的Line-Cal工具能够根据介质厚度、铜箔厚度及目标阻抗快速计算微带线宽,配合Momentum电磁仿真优化寄生效应,可满足2.4GHz频段附近的谐波抑制需求。此类设计适用于无线前端、测试治具等场景。本文围绕FR4板材上的微带线低通滤波

weixin_29190651的博客 255

基于ADS 2023的FR4微带线低通滤波器设计与仿真

射频系统中,低通滤波器用于抑制带外杂散与谐波分量,是信号链路的关键环节。微带线因其平面结构和易集成特性,成为高频电路设计的常用实现方式。FR4板材作为工业级最普遍的基材,成本低、加工便捷,在2.5GHz以下频段表现出足够的电气性能。设计微带线低通滤波器时,常基于切比雪夫原型进行阻抗与频率变换,再借助ADS 2023的Line-Cal工具快速计算微带线宽与长度,并通过S参数仿真验证性能。从理论计算到版图导出,该流程可高效支撑射频工程师完成滤波器原型验证。本文以DDS输出谐波抑制为例,完整展示FR4基板上微带线

weixin_30872577的博客 276

仿真软件的基础知识

说到SI信号完整性,很多人的第一反映就是仿真,很多人的第一问就是:你们用什么仿真软件?搁以前,我还试着解释一下,现在就直接不说了,试着去做一些事情,做总比说管用。写点东西,顺便总结一下自己的工作历程。 话不多说,直接上这篇文字的总结图,如下: 第一部分 仿真软件实操比较 本例以Cadence的Sigrity、ADS的SIpro&Ansys的SIwave三款软件来进行信号线的参数提取。 01导入设计文档 从三者导入文档的便捷度来看,Sigrity直接导入无障碍。SIwave需要设计文档的格式转换,

weixin_44648688的博客 2521

chrome-win64-159.0.8145.0(Canary).zip

内容概要:Chrome for Testing 官方 chrome 159.0.8145.0 win64 平台(金丝雀版通道),原版未修改,附来源说明。 适合人群:Windows 64 位 上的自动化测试工程师、爬虫开发者、CI 环境搭建者。 使用场景及目标:①Chrome for Testing 官方浏览器本体,供自动化测试使用;②与同版本 chromedriver 配套;③CI/容器环境的浏览器运行时。 其他说明:Chrome for Testing 为 Google 官方发布、允许自由分发的文件;本资源为第三方整理的下载便利服务。

chrome-headless-shell-win64-157.0.8103.38(Stable).zip

Chrome for Testing 官方指定版本的 Chrome 浏览器、ChromeDriver 与 Headless Shell 压缩包,适用于 Selenium、Playwright 等自动化测试环境搭建,覆盖 Windows、macOS、Linux 多平台,解压即可使用,无需额外安装或配置。

chrome-win32-159.0.8150.0(Canary).zip

内容概要:Chrome for Testing 官方 chrome 159.0.8150.0 win32 平台(金丝雀版通道),原版未修改,附来源说明。 适合人群:Windows 32 位 上的自动化测试工程师、爬虫开发者、CI 环境搭建者。 使用场景及目标:①Chrome for Testing 官方浏览器本体,供自动化测试使用;②与同版本 chromedriver 配套;③CI/容器环境的浏览器运行时。 其他说明:Chrome for Testing 为 Google 官方发布、允许自由分发的文件;本资源为第三方整理的下载便利服务。

chromedriver-win32-160.0.8164.0(Canary).zip

chromedriver-win32-160.0.8164.0(Canary).zip

chrome-headless-shell-mac-x64-160.0.8164.0(Canary).zip

内容概要:Chrome for Testing 官方 chrome-headless-shell 160.0.8164.0 mac-x64 平台(金丝雀版通道),原版未修改,附来源说明。 适合人群:macOS Intel 上的自动化测试工程师、爬虫开发者、CI 环境搭建者。 使用场景及目标:①无头浏览器内核(Playwright/Puppeteer/Selenium 无界面自动化与爬虫);②服务器/容器离线内置;③版本精准匹配(chromedriver 与 Chrome 需同大版本)。 其他说明:Chrome for Testing 为 Google 官方发布、允许自由分发的文件;本资源为第三方整理的下载便利服务。

化工MES-石化盈科信息技术有限责任公司.pptx

化工MES-石化盈科信息技术有限责任公司.pptx

健康管理服务运营方案.pptx

健康管理服务运营方案.pptx

钢铁行业工业互联网安全解决方案.pptx

钢铁行业工业互联网安全解决方案.pptx

集团S&OP供应链计划管理蓝图规划方案(供应链二).pptx

集团S&OP供应链计划管理蓝图规划方案(供应链二).pptx

互联网 医联体信息化建设和实施解决方案.pptx

互联网 医联体信息化建设和实施解决方案.pptx

TVJ1120资源及合并指令

内容概要:本文提供了TVJ1120.apk拆分文件的下载链接及合并方法,包含两个分卷文件(part1和part2)的CSDN下载地址,并给出在Windows系统下使用copy命令将两个分卷合并为完整APK文件的具体指令。同时提供使用certutil工具对合并后的TVJ1120.apk进行SHA256哈希值校验的命令,以确保文件完整性与安全性。; 适合人群:具备基本计算机操作能力,熟悉命令行工具使用的开发者或技术人员;需要下载并验证安卓应用文件完整性的用户。; 使用场景及目标:①用于从分卷压缩或拆分的APK文件中恢复完整的安装包;②通过哈希校验确保下载的APK文件未被篡改或损坏,保障应用安全性和可用性;③适用于软件分发、移动应用测试、逆向分析等技术场景。; 阅读建议:在操作前确认已下载全部分卷文件,并在相同目录下执行合并命令;建议严格比对生成的SHA256值与官方提供的校验值,防止运行不安全的应用程序。

DeepSeek高阶应用:DeepSeek+Coze构建智能文献综述与趋势分析自动化系统

本文详细介绍了如何利用DeepSeek与Coze构建智能文献综述与趋势分析自动化系统。通过DeepSeek的深度语义理解和结构化信息提取能力,结合Coze的可视化工作流编排,实现学术论文的自动解析、分类整理与知识入库。该系统能7x24小时自动追踪领域前沿,将研究人员从繁琐的文献处理中解放出来,专注于更高层次的思考与创新。

weixin_29050271的博客 182

别再死记硬背参数了!手把手教你用Fluent欧拉模型搞定流化床模拟(附颗粒粘度/体积分数设置详解)

本文深入解析Fluent欧拉模型在流化床模拟中的应用,重点讲解颗粒粘度和体积分数等关键参数的设置原理与科学方法。通过对比不同模型(如Syamlal-O'Brien、Gidaspow)的适用场景,帮助工程师摆脱参数死记硬背,实现精准模拟。内容涵盖相间作用机制、求解策略优化及结果验证,为化工、能源领域的流化床模拟提供实用指南。

weixin_42656416的博客 433

Android GNSS 可视卫星星空图/卫星天顶图 原理及画法介绍

目录1 概念介绍2 绘制步骤2.1 获取卫星信息2.2 绘制底图 效果图: 1 概念介绍 首先介绍一下方位角和高度角的概念: 方位角:是从某点的指北(地理北极)方向线起,依顺时针方向到目标方向线之间的水平夹角。 高度角:从一点至观测目标的方向线与水平面间的夹角。 卫星天顶图 即是根据每一颗卫星的方位角和高度角将其画在以观测位置为中心的天顶图上。 天顶图其底图为由外向内的三个圆和四条直线。三个圆由外向内依次代表高度角0°、30°、60°,中心点代表90°;四条直线分别表示正北-正南、东北-西南、正东

x1471898145的博客 1万+

FPGA编译加速实战:6大可落地的Vivado优化策略

FPGA编译本质上是NP-hard约束满足问题求解,而非传统软件编译;Vivado作为时序驱动的硬件实现工具链,其耗时瓶颈集中在Implementation阶段的布局布线(PnR)与逻辑优化。理解这一原理,才能跳出‘加线程’‘升版本’等表面优化,转向精准时序约束、增量编译、物理锚点控制、IP配置精简等工程级干预。这些技术手段直接作用于Vivado的Tcl执行流与底层求解空间,显著压缩搜索范围、减少无效迭代——尤其适用于Zynq/UltraScale等中大型项目(LUT > 80K、多时钟域、DDR/PCIe

weixin_34226182的博客 419

华为OD机考双机位C卷 - 最左侧冗余覆盖子串 (Java)

华为OD机考双机位C卷 - 最左侧冗余覆盖子串 (Java), 提供Java、C++、Python、Go、JavaScript源码实现,并提供完整思路讲解,以及在线OJ模拟做题。

算法大师! 60

深度强化学习 | 基于SAC算法的动态避障(ROS C++仿真)

本文介绍了基于SAC(软性演员-评论家)算法的机器人运动规划方法,通过PyTorch框架实现了端到端训练,并部署到Python和ROS C++中。实验结果显示,基于SAC算法的智能体在动态避障任务中表现良好,能实现从起点到终点的无碰撞导航。

FRIGIDWINTER的博客 8230

当C#遇见声音魔法:从麦克风到文字的0.1秒奇幻漂流

为什么选300Hz?因为人声基频通常在85-255Hz,但清脆的“啊”可能到2kHz,所以300Hz是安全区!(参考知识库[1])

墨夶的博客 367

组态王的日历时间控件脚本

日期时间控件中的脚本中在小于10的月份和天数前必须要加上0,这是由首字符对比机制规定的,首字母相同,就不再不做对比了,比如1和11,是一样的。首字母不同,再比较下一位。 float Ayear1; float Amonth1; float Aday1; string temp1; Ayear1=sd.Year; Amonth1=sd.Month; Aday1=sd.Day; temp1=StrFromInt( Ayear1, 10 ); if(Amonth1<10) temp1=temp1+"-0"+

逍遥子的博客 5720

OV9734 DATASHEET,完整规格书

OV9734完整规格书,包括电气参数,尺寸规格,寄存器配置表等

Outlook Express 6 (OE6) for Win7/Win8/Win10

英文版 Outlook Express6.0, 兼容Win7/Win10/WinXP,解压就可用。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

pscad IEEE标准系统搭建说明

pscad IEEE标准系统搭建说明,包含典型的IEEE 9节点、14节点、30节点、39节点和118节点系统。内含标准测试系统的原始数据和潮流结果。

上一篇: Node Exporter隐藏技巧:不用写代码就能监控硬件温度/风扇转速
下一篇: 1GHz带宽示波器也能玩转MIPI信号?实测DDR时钟与RAW10数据解析技巧
omega
博客等级 码龄26年 1055粉丝 1548原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值
⌂ 换网址