UVa Problem 10012 How Big Is It? (它有多大?)

【OpenCV】复杂场景下的高精度圆检测实战(附完整代码) 本文针对OpenCV霍夫圆检测在复杂场景下易失效的问题,提出了一套基于轮廓分析的高精度圆检测实战方案。通过图像预处理、轮廓发现及多轮几何筛选(面积、周长、椭圆拟合、多边形逼近),有效排除噪声和类圆干扰物,显著提升复杂场景下的检测鲁棒性,并附完整可调参的Python代码实现。 阅读详情
// How Big Is It? (它有多大?)
// PC/UVa IDs: 111308/10012, Popularity: B, Success rate: low Level: 3
// Verdict: Accepted
// Submission Date: 2011-11-05
// UVa Run Time: 0.272s
//
// 版权所有(C)2011,邱秋。metaphysis # yeah dot net
//
// [解题方法]
// 通过回溯遍历所有可能的圆环排列,计算其宽度,然后取最小值即为所求,在计算圆环宽度时需要注意一些
// 细节。

#include <iostream>
#include <cstring>
#include <iomanip>
#include <cmath>

using namespace std;

#define MAXN 8

struct cycle
{
	double x, y;
	double r;
};

double smallestWidth;

// 计算指定顺序的圆环排列的宽度。
double calWidth(double radius[], int m, int used[])
{
	double width = 0.0;
	cycle packedCycles[MAXN];

	// 以盒子的左下角为直角坐标系原点(0,0),计算最后放置的圆环圆心坐标,其横坐标加上其
	// 半径即是盒子的宽度。在计算时,需要考虑到圆环可能完全在某一个圆环下面而没有超出较大圆
	// 环的半径之外。
	packedCycles[0] = (cycle){radius[used[0]], radius[used[0]], radius[used[0]]};
	for (int i = 1; i < m; i++)
	{
		// 当前为第 i 个圆环安排位置。假设圆环与编号为 0 - (i - 1)的圆环相切,检测
		// 是否存在矛盾,若无矛盾,则第 i 个圆环与此圆环相切,进而可以计算圆心坐标。
		for (int j = i - 1; j >= 0; j--)
		{
			// 圆环的圆心坐标。
			double tmpX = packedCycles[j].x, tmpY = radius[used[i]];

			// 圆心距及纵坐标之差。
			double centerDist = packedCycles[j].r + radius[used[i]];
			double yDiff = fabs(packedCycles[j].r - radius[used[i]]);

			// 由勾股定理计算横坐标之差。注意要处理特殊情况,若第一个圆环比较小,
			// 则后面的圆环可能超出左边界,故其横坐标至少为其半径。
			tmpX += sqrt(pow(centerDist, 2) - pow(yDiff, 2));
			if (tmpX < radius[used[i]])
				tmpX = radius[used[i]];

			// 检测是否存在冲突,即两者圆心的距离是否大于两个圆环半径之和。
			bool successed = true;
			for (int k = 0; k < i; k++)
				if (k != j)
				{
					centerDist = pow(tmpX - packedCycles[k].x, 2);
					centerDist += pow(tmpY - packedCycles[k].y, 2);
					centerDist = sqrt(centerDist);
					
					if (centerDist < (packedCycles[k].r + radius[used[i]]))
					{
						successed = false;
						break;
					}
				}

			// 圆环放置无冲突。
			if (successed)
			{
				packedCycles[i] = (cycle){tmpX, tmpY, radius[used[i]]};
				break;
			}
		}
	}

	// 返回盒子的宽度,取圆心坐标加上半径的最大值,因为最后一个圆不一定是最靠右的。
	double maxRight = 0.0;
	for (int i = 0; i < m; i++)
		maxRight = max(maxRight, packedCycles[i].x + packedCycles[i].r);

	return maxRight;
}

// 回溯遍历所有可能的圆环排列。
void backtrack(double radius[], int m, int c, int used[], bool unused[])
{
	if (c == m)
		smallestWidth = min(smallestWidth, calWidth(radius, m, used));
	else
	{
		for (int i = 0; i < m; i++)
			if (unused[i])
			{
				unused[i] = false;
				used[c] = i;
				backtrack(radius, m, c + 1, used, unused);
				unused[i] = true;
			}
	}
}

int main(int ac, char *av[])
{
	int cases, m;
	double radius[MAXN];
	int used[MAXN];
	bool unused[MAXN];

	cout.precision(3);
	cout.setf(ios::fixed | ios::showpoint);
		
	cin >> cases;
	while (cases--)
	{
		cin >> m;

		smallestWidth = 0.0;
		for (int i = 0; i < m; i++)
		{
			cin >> radius[i];
			smallestWidth += radius[i];
		}

		smallestWidth *= 2.0;
		memset(unused, true, sizeof(unused));
		backtrack(radius, m, 0, used, unused);

		cout << smallestWidth << endl;
	}

	return 0;
}


高通开发系列 - Camera之摄像头调试记录 记录一些调试内容 阅读详情

相关推荐

IT资产管理(三)之GLPI资产录入

glpi 在 10 版本之后已经有自带的 glpi-agent 代理程序可自动获取服务器、电脑等的信息并进行自动录入和更新,不再依赖 10 版本之前的 fusioninventory 插件或者第三方资产统计平台 OCS Inventory 等

予挚之的博客 3010

UVA10012 How Big Is It?【全排列+回溯】

Ian’s going to California, and he has to pack his things, including his collection of circles. Given a set of circles, your program must find the smallest rectangular box in which they fit. &amp;amp;nbsp;&amp;amp;nbs...

海岛Blog 787

告别商业软件?实测用gnina(CNN打分版)做分子对接:从安装到跑通第一个案例

本文详细介绍了基于卷积神经网络(CNN)的开源分子对接工具gnina的安装与实战应用。从环境配置、编译安装到运行第一个COVID-19主蛋白酶抑制剂对接案例,全面解析了这款替代商业软件的强大功能,特别适合预算有限的研究团队进行药物发现和虚拟筛选。

weixin_42522320的博客 261

UVa 10012 - How Big Is It?

/* 暴力枚举,模拟放入圆。 半径为R1、R2的两个圆相切,通过勾股定理推出,两圆心的水平距离为 2sqrt(R1*R2) 注意到对一些特殊情况处理,如例子 4 1000.0 1.0 1.0 1.0 最坏时间复杂度为 8!,其实可以优化成 8!/2, 因为排序1、2、3 和 排序3、2、1求出来的值是相等的。 */ #include #include #include

cugfjp的专栏 452

蒙特卡洛+概率潮流!基于蒙特卡洛和新能源出力模拟的概率潮流分布程序代码!

最后,导出光照强度、风速、网损和节点电压的概率分布图,并计算了各节点电压和网损的平均值和方差,展示了接入前后的节点电压对比图。在不确定性增加的电力系统中,概率潮流成为含随机因素规划问题的求解前提,可以更加真实地反映电力系统的全面信息。此外,概率潮流还可用于研究风电和光伏发电出力以及电动汽车消耗功率和向电力系统反向供电功率的不确定性对电力系统的影响,发现系统运行中的潜在风险,为系统运行控制提供参考。概率潮流的目的是揭示电网中随机变量对系统的影响,发现电网中的薄弱环节,为规划和调度部门的决策提供有价值的信息。

weixin_48747334的博客 1927

SAP S4业务伙伴(BP)实战指南:从角色分配到数据同步的完整流程

本文详细解析了SAP S4业务伙伴(BP)功能,从基础概念到实战操作,涵盖角色分配、数据同步及常见问题排查。通过BP机制,企业可高效管理客户、供应商等多重身份,实现数据共享和动态切换,显著提升主数据管理效率。特别适合SAP实施顾问和ERP管理员参考。

y2z3a4b5c的博客 875

UVA 10012 How Big Is It?

UVA 10012 How Big Is It?题目大意:给出一组圆的半径,这组圆排成一排,要求都切于底面,求要用最少长为多少的长方形能装下它们解题思路:先全排列,然后回溯 注意点:每个圆不能只计算与上一个圆间的距离,因为可能上个圆可能很小导致圆直接与上上个圆相切而不接触上一个圆,同理,最后也不能直接加上最后一个圆的半径,因为可能最后一个圆特别小 所以每次访问一个圆时计算前几个圆与它的距离更新坐

ZeroLH00的博客 501

【推荐100个unity插件】Unity URP(通用渲染管线)的基于物理的天地和预计算大气散射——UnityPhysicallyBasedSkyURP

本文介绍了Unity URP(通用渲染管线)中基于物理的天地和预计算大气散射的实现方法。该插件提供物理天空、大气散射、高度雾效、动态天空反射和环境光等功能,要求Unity 2022.3及以上版本,支持着色器模型3.5+。使用步骤包括:添加渲染器功能、配置Volume组件(天空、雾效等),并建议太阳强度设为3、曝光为0作为初始设置。插件已在GitHub和Gitee开源,附带详细配置截图和效果展示。文末推荐了多个Unity开发相关专栏,涵盖游戏开发全领域知识。作者向宇提供了博客链接,欢迎交流学习问题。

向宇的博客,专注php/web全栈 unity游戏开发,欢迎大家评论纠错 1235

机器学习:聚类-性能度量指标简介(附代码实现)

聚类的性能度量大致有两类:“外部指标”和“内部指标”。 外部指标:是指把算法得到的划分结果跟某个外部的“参考模型”(如专家给出的划分结果)比较。 定义: 有如下常用的聚类性能度量的外部指标: Jaccard系数(JC): FM指数(FMI): Rand指数(RI): 容易看出,这些指标的值都在[0,1]之间,且越大越好。 内部指标:是指直接考察聚类结果,不利用任何参...

do it 3174

多模型机器学习生存预测分析:AUC比较、生存分层与SHAP解释

本文研究了多种机器学习模型在心力衰竭患者生存预测中的应用。通过比较逻辑回归、随机森林、XGBoost、LightGBM和梯度提升机五种模型的AUC表现,选择最优预测模型。基于最优模型的预测概率对患者进行风险分层,并使用Kaplan-Meier生存分析和log-rank检验验证分层的有效性。最后采用SHAP方法解释模型决策过程,识别关键预测因素。研究提供了从模型构建、评估到解释的完整技术流程,为临床预后预测提供了可复现的分析框架。

AI的内部世界的博客 158

C盘在同一时间突然多出100g的文件,请问是什么原因,以及是否能删除?

🏆本文收录于 《全栈Bug调优(实战版)》 专栏,该专栏专注于分享我在真实项目开发中遇到的各类疑难Bug及其深层成因,并系统提供高效、可复现的解决思路和实操方案。无论你是刚入行的新手开发者,还是拥有多年项目经验的资深工程师,本专栏都将为你提供一条系统化、高质量的问题排查与优化路径,助力你加速成长,攻克技术壁垒,迈向技术价值最大化与职业发展的更高峰🚀!

**My Coding Family** 1780

uva 10012 How Big Is It?

uva 10012 How Big Is It?

@fei 1534

基于Simulink的压缩空气储能(Compressed Air Energy Storage, CAES)

压缩空气储能(CAES)是一种将电能转化为压缩空气存储在高压容器中,然后在需要时释放空气驱动涡轮机发电的技术。它具有大规模、长寿命和环境友好的特点,在电力系统中用于削峰填谷、频率调节和备用电源等应用。本项目将详细介绍如何在MATLAB/Simulink中搭建一个完整的基于压缩空气储能的系统,并提供具体的代码实现和设计步骤。如果你需要实现更复杂的控制逻辑,可以使用MATLAB Function模块。以下是一个简单的例子,展示了如何在该模块中实现一个条件逻辑:Matlab深色版本Kp = 1;

MHD0815的博客 1281

问题求解策略 (General Problem Solving Techniques)

从第一章开始慢慢刷题,加油! 本文来自《算法竞赛入门经典——训练指南》,官方网站:http://code.google.com/p/aoapc-book/ UVa特别题库 UVa网站专门为本书设立的分类题库配合,方便读者提交: http://uva.onlinejudge.org/index.php?option=com_onlinejudge&Itemid=8&category=442

ACM之路 1810

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

贝叶斯统计 [韦来生编]

贝叶斯(Bayes)统计是近几十年来迅速发展起来的数理统计的一个重要分支。贝叶斯方法与经典统计方法的主要不同之处是进行统计推断时除了利用样本信息外,还要利用参数的先验信息,因此可以提高统计推断或统计决策的效果。它在经济、金融、生物、医学、自然科学和社会科学等许多领域具有广泛的应用。贝叶斯方法的研究已渗透到了统计学的几乎所有领域。作者在给中国科学技术大学概率论与数理统计专业本科生开设的“数理统计”课程中有一章专门讲授“贝叶斯方法和统计决策理论”,近十年来也给中国科学技术大学概率统计专业研究生开设过几次“贝叶斯分析”课。本书是在对过去讲稿的内容作了适当的增减和调整的基础上完成的。  本书共分六章。第1章是绪论,介绍了贝叶斯统计的若干基本概念,同时对必要的数理统计的基础知识有重点地作了回顾。第二章介绍了确定先验分布的若干可供选择的方法。第三章介绍了几类常见统计模型参数的后验分布的主要结果和计算方法。第四章和第五章分别介绍了“贝叶斯统计推断”和“贝叶斯统计决策”的内容。第六章介绍了贝叶斯统计计算的若干方法,包括蒙特卡洛方法和马尔可夫链蒙特卡洛(MCMC)方法以及相关统计软件的简介。本书的每一章附右大量的例题和习题,书末附有常用的几个表格和部分习题解答供读者查用。  大约可在54学时内讲授本书的第1章至第六章的主要内容,教师可根据学时需要选讲本书第1章至第六章的部分内容。书中标“*”号的章节可略去不讲,留给读者作为阅读材料。第六章例题中的R代码和部分例题的数据文件等可从作者个人主页下载。  作者在编写本书的过程中参考了J.O.Berger教授的《统计决策论及贝叶斯分析》和茆诗松教授编写的《贝叶斯统计》等书中的一些内容,以及《贝叶斯分析》一书中由张伟平博士编写的有关贝叶斯统计计算的一些内容。在此表示衷心感谢。  本书编写准备过程中,中国科学技术大学统计与金融系的几个研究生帮助完成了本书部分中文的录入和排版,作者对他们的辛勤工作表示真诚的感谢。高等教育出版社为本书的出版给予了大力支持。在此一并致谢。

uva10012(圆)

How Big Is It?  Ian's going to California, and he has to pack his things, including hiscollection of circles. Given a set of circles, your program mustfind the smallest rectangular box in w

龙崎的专栏 486

数学建模模型总结

这是本人在两年内准备参加数学建模竞赛搜集到的模型资料,已经经过了本人的筛选和整理,希望能够对准备参加数学建模竞赛的学弟学妹们提供一些帮助!

【索引】Chapter 1. Algorithm Design_General Problem Solving Techniques_Exercises: Beginner

链接:http://uva.onlinejudge.org/index.php?option=com_onlinejudge&Itemid=8&category=457 有三题是挂掉了 Root :: AOAPC I: Beginning Algorithm Contests -- Training Guide (Rujia Liu) :: Chapter 1. Algorit

Remilia's 1467

vb 6.0并口开发操作实例

vb6并口开发,简体中文,试例内有inpout32.dll动态链接库

【UVA】10012 - How Big Is It?(暴力)

利用DFS枚举所有排列,之后每次添加一个圆的时候,他的位置是和前面所有已经添加圆的相切的位置的最大。 14383635 10012 How Big Is It? Accepted C++ 0.086 2014-10-20 11:07:33 #include #include #include #include using

花月阁 984

uva10012 不是那么简单的,有陷阱!

这道题第一次做以为是一般的回溯题,最初的思路就是将各圆形全排列,放置新圆的时候让其与前一个圆相切,最后通过回溯得到矩形的最小size。十几分钟编完后结果WA,想了好一会发现问题所在,不能只让其与前一个圆相切(如果第一个圆很大,半径比方说是100,第二个圆很小,半径是1,第三个圆也很大,半径同样是100,放第三个圆的时候如果是和第二个圆相切则必定会与第一个圆相交,就不可以了)。然后就开始修改代码,然

monkeyduck的专栏 1222

uva 10012 - How Big Is It?(排列 + 回溯)

题目:uva 10012 - How Big Is It? 题目大意:给出n个圆的半径,要求圆要和地面相切,求这样的圆怎么组合能够使得盒子的宽度最短。 解题思路:这题里面情况会有两个大圆相切,然后中间夹多个小圆,这样这些小圆的距离就不用算入盒子的宽度了,这里先用排列组合的方式将这几个圆全部的组合方式排列出来,这样这些圆的前后关系就定了,但是现在就需要判断这样的情况下的盒子的宽度

1142

UVA How Big Is It?

题目如下: How Big Is It?  Ian's going to California, and he has to pack his things, including hiscollection of circles. Given a set of circles, your program mustfind the smallest r

hexiecs的技术专栏 1049

UVA10012

题目的意思就是给你你哥yuan

潜水的程序猿 592

UVa10012 - How Big Is It?

题目地址:点击打开链接 这个题的困难就是已经知道一组球的全排列了,怎么求包围该组球的最小的矩形的长度。 首先确定每个球圆心的位置: 要想使包围的矩形最小,球都是尽可能的与其他球接触的 如果两个球a,b接触,那么position[b]=position[a]+2*sqrt(rad[a]*rad[b]) 第i个球的圆心的位置 为max(position[j]+2*sqrt(rad[j]*r

460

Halcon 轮廓合并算子

union_cocircular_contours_xld (Operator) Name union_cocircular_contours_xld — 计算属于同一圆的轮廓之和 Signature union_cocircular_contours_xld(Contours : UnionContours : MaxArcAngleDiff, MaxArcOverlap, MaxTangent...

那人那事的博客 1万+

UVa Problem 10180 Rope Crisis in Ropeland! (绳子王国的危机!)

// Rope Crisis in Ropeland! (绳子王国的危机!) // PC/UVa IDs: 111302/10180, Popularity: B, Success rate: average Level: 2 // Verdict: Accepted // Submission Date: 2011-11-02 // UVa Run Time: 0.696s // // 版权所有

寂静山林 3505

UVa Problem 10136 Chocolate Chip Cookies (巧克力片饼干)

// Chocolate Chip Cookies (巧克力片饼干) // PC/UVa IDs: 111304/10136, Popularity: C, Success rate: average Level: 3 // Verdict: Accepted // Submission Date: 2011-11-05 // UVa Run Time: 0.020s // // 版权所有(C)2

寂静山林 2953
上一篇: UVa Problem 10209 Is This Integration? (需要积分吗?)
下一篇: UVa Problem 10135 Herding Frosh (新生集会)
寂静山林
博客等级 码龄22年 648粉丝 2077原创
评论 3
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值
⌂ 换网址