基于Simscape的双PID比例调速阀与比例溢流阀液压控制系统建模与仿真

这是一个非常有价值的工程问题。在Simulink中利用Simscape Fluids搭建液压被控对象,并通过PID实现闭环控制,是液压系统仿真领域的核心技能。下面我将从系统架构设计、Simscape物理建模、PID控制器实现、参数整定与联合仿真四个维度,为你提供一份详细指南,包含完整的代码和模块解释。


基于Simscape的双PID比例调速阀与比例溢流阀液压控制系统建模与仿真

第一章 绪论与系统总体设计

1.1 液压控制系统概述

在现代液压传动系统中,比例控制技术已成为核心组成部分。与传统的开关式液压控制相比,电液比例控制能够根据输入电信号的大小连续、成比例地调节液压系统的压力或流量 。本设计的核心目标是构建一个典型的“泵源-阀控-缸”液压系统,通过两个独立的PID控制器分别调节比例调速阀以控制油缸的运动速度,以及比例溢流阀以控制系统压力,实现速度和压力的解耦控制。

1.2 系统工作原理

根据液压原理,比例调速阀通常由定差减压阀和节流阀串联而成,具有压力补偿功能,能使流量基本不受负载变化的影响 。比例溢流阀则通常安装在泵出口或液压缸的进油腔,通过调节溢流压力来限定系统最高压力或实现压力控制 。

控制逻辑如下:

  • 速度闭环:指令速度与实际速度(通过位移微分或速度传感器获得)比较,差值
simulik中的液压建模Simscape_Fluids资料收集及学习(原SimHydraulics) Simulink中原本有个SimHydraulics模块,专门用来进行液压方面的建模仿真。 今天在R2016版本中没找到,后来才知道新版本中已经变了名字了,具体的还在学习。先将部分学习资料记录下来。 1、具体位置:Simscape模块下的Fluids子模块: 2、部分资料: simscape官方介绍——https://cn.mathworks.com/products/simhyd 阅读详情

相关推荐

simscape 液压系统笔记

1. Introduction 先关注simscape中提供的几个典型的液压系统,再进行总结梳理。 2. 典型液压系统 2.1 简易的开关阀 开环阀放在油路的入口或者出口都可以,求解器f(x)也同样的,放在油路的输入或者输出也都可以。 2.2 变量泵直接控制 该模型由关节驱动器、液压转换接口和驱动自由度组成,流量由变量泵控制器。 这个系统是matlab 用于挖掘机系统仿真的液压模型,充分考虑了挖掘机的负流量液压系统特性。 整个系统 液压执行器 变量泵的压强由控制器控制,产生恒定速度的流体,驱动关节运

降低学习速度,提高学习效率的地方 6190

Simscape液压系统建模实战:从基础元件到复杂控制

本文详细介绍了使用Simscape进行液压系统建模的实战技巧,从基础元件到复杂控制策略全面解析。通过MATLAB的Simscape Fluids工具包,工程师可以高效模拟液压系统的物理特性,包括流体动力学、压力损失等。文章包含液压泵、控制阀的建模方法,以及比例阀闭环控制和变量泵负载敏感控制等高级策略,并提供了挖掘机液压系统仿真实例,帮助读者掌握机电液一体化仿真技术。

bert9linguist的博客 512

SimScape液压系统模拟教程:双三角结构模型深入解析

在工程设计与分析领域,仿真工具是理解和预测系统行为的关键。Simscape是 MathWorks 公司推出的一款多域物理建模和仿真软件,它允许工程师模拟电气、机械、液压、热力等多个物理领域内的动态系统。Simscape 可以和MATLAB与Simulink无缝集成,为用户提供了一个直观、模块化的环境,用于创建和测试复杂的系统模型。使用Simscape进行仿真,通常遵循以下工作流程:需求分析:明确仿真目的和所需达到的目标。模型构建:利用Simscape提供的元件构建系统模型。

weixin_31974443的博客 893

Simscape Fluids 中的燃油供应系统模型:带有油箱、燃油管路、泵、控制系统和 MATLAB 代码的燃油供应系统,用于自动测试。-matlab开发

该文件包含一个使用 Simscape 和 Simscape Fluids 建模的简单燃料系统模型。 泵和阀门控制油箱之间的流量。 沿燃料管线的压降取决于管线末端的高度。 该模型包括一组测试场景,其中包括系统中组件的不同环境条件和故障事件。 MATLAB 脚本自动执行这些测试,并生成一个图来显示系统在每个测试中的表现。 请阅读 README.txt 文件以开始使用。 有关此模型的概述,请观看此视频(3 分钟): http://www.mathworks.com/videos/modeling-a-fuel-supply-system-74106.html 要了解有关使用 Simscape Fluids 进行液压仿真的更多信息,请观看此网络研讨会: http://www.mathworks.com/videos/hydraulic-simulation-with-simhydraulics

Simscape 多体多物理场库.rar

1.版本:matlab2014/2019a/2024a 2.附赠案例数据可直接运行matlab程序。

面试复习题--RN面试

考察点:热更新方案的深度理解,选型能力,实战落地经验。答题思路主流热更新方案对比。

hqiangtai的博客 742

从踩坑到填平:我在RHEL7上给Tesla A100装驱动的完整记录(含Fabric Manager配置)

本文详细记录了在RHEL7系统上为Tesla A100安装Nvidia驱动的完整过程,包括Fabric Manager配置的关键步骤。通过分析A100架构的特殊性,提供了从驱动安装到服务配置的详细指南,并分享了常见问题的排查方法和性能调优技巧,帮助用户高效部署高性能GPU计算环境。

weixin_29291863的博客 287

Fluent基于低氧舱气体交换仿真(氮气与空气混合)

一、背景概述 模拟低氧舱充氮气和排除混合气体的过程,假设注入95%的氮气,舱内原有气体为空气,压力为标准大气压,温度为300K。观察气体注入过程中,舱内平均氮气和氧气浓度的变化。 二、Fluent设置 Setup 1、General type选择压力基 绝对速度 瞬态 重力勾选 2、Model 能量方程开启 组分运输开启,设置方法如下: 选择后OK,view就会变成Edit,点击Edit。然后再次点击Edit。 将组分中的非氮气氧气和空气的气体移除,右边选项需要将空气放在最后一位。 3、Materi

qq_35535616的博客 1万+

Zabbix在Ubuntu 22.04上的性能优化与监控实战:从基础安装到高级配置

本文详细介绍了在Ubuntu 22.04系统上部署和优化Zabbix监控系统的完整流程,从基础安装到高级配置。内容包括MySQL数据库设置、Zabbix服务器与Web前端优化、性能调优策略以及实战监控场景应用,帮助用户构建高效的企业级监控解决方案。

sss66的博客 897

手把手教你用Boot-Repair快速修复Ubuntu启动分区缺失(附详细命令行步骤)

本文详细介绍了如何使用Boot-Repair工具快速修复Ubuntu启动分区缺失问题,包括诊断、应急准备、自动修复和手动命令操作。通过grub rescue模式下的关键命令和Boot-Repair的图形界面操作,帮助用户高效解决启动分区故障,确保系统恢复正常运行。

weixin_29229989的博客 573

AI故障预测系统架构设计:5个核心模块+3种主流架构,收藏这篇就够了

深夜11点,某汽车工厂的生产线突然停机——核心机器人的轴承磨损过度导致卡壳。维修人员连夜抢修,直接损失超过50万元,还延误了客户的交货期。传统的“事后维修”或“定期维护”要么代价高昂,要么防不胜防。AI故障预测系统的出现,让“精准维护”成为可能——它能通过传感器数据提前7-30天预警故障,将停机损失降低80%以上。知道要做故障预测,却不知道怎么搭系统——数据怎么采集?特征怎么提取?模型怎么部署?架构怎么选?本文将解决这些问题:我们会拆解AI故障预测系统的5个核心模块,分析3种主流架构。

AIGC应用创新大全的博客 1023

为什么idea已经改了UTF-8还是乱码,如何解决?

🏆本文收录于 《全栈Bug调优(实战版)》 专栏,该专栏专注于分享我在真实项目开发中遇到的各类疑难Bug及其深层成因,并系统提供高效、可复现的解决思路和实操方案。无论你是刚入行的新手开发者,还是拥有多年项目经验的资深工程师,本专栏都将为你提供一条系统化、高质量的问题排查与优化路径,助力你加速成长,攻克技术壁垒,迈向技术价值最大化与职业发展的更高峰🚀!

**My Coding Family** 1581

【人工智能之深度学习】12. BERT微调实战:医疗文本分类的领域自适应技巧与工业级实现

摘要:医疗文本分类是自然语言处理在医疗健康领域的核心应用,可辅助疾病诊断、病历结构化和医疗质量监控。然而,医疗文本的专业术语密集、实体关系复杂及数据长尾分布等特性,导致通用BERT模型性能受限。本文系统阐述医疗文本分类的领域自适应技术,从理论原理到工业级实现展开全流程讲解。首先分析医疗文本的独特属性及技术挑战;随后详解领域继续预训练、适配器微调、对抗训练等核心技术的数学原理;构建包含数据预处理、模型优化、隐私保护的完整实战架构;通过疾病分类、情感分析、事件检测三大案例验证技术有效性。

专注于人工智能、软件开发、工控自动化、工厂数字化及智能化等领域,希望和大家共同进步! 1013

Probability and Statistics - 4th edition

Probability and Statistics - 4th edition

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

IDEA的使用指南

IDEA基于java的使用手册,可以最快速的上手,在使用中不断的丰富自己的使用技巧.

上一篇: 基于图像处理的印刷品缺陷检测系统的设计与实现
下一篇: 串联双网络:基于ResNet正向建模与cVAE逆向学习的材料设计框架
神经网络66544
博客等级 码龄2年 2162粉丝 547原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

神经网络66544

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值
⌂ 换网址