Zabbix server: Zabbix server: Utilization of poller data collector processes, in 75%

Zabbix告警处理实战:Poller进程利用率超过75%怎么办? Zabbix监控系统出现"poller进程利用率超过75%"告警时,表明数据采集能力已达瓶颈。本文提供三步解决方案:首先解析告警含义,明确poller进程超负荷运行会导致数据延迟或丢失;其次通过查看配置、评估负载、排查高频监控项定位问题源头;最后提出增加poller数量(建议设为CPU核心数的4-8倍)和优化监控频率(关键项60s以上)的具体优化措施。通过系统配置调整和监控项优化,可有效提升Zabbix采集性能。 阅读详情
AI摘要

文章讲述了在Zabbix服务器中遇到Utilizationofpollerdatacollectorprocesses过高问题,通过日志分析、停止自动发现活动和调整zabbix_server.conf参数如StartPollers,最终解决了服务器负载过大导致的100%利用率问题,强调了性能优化和配置管理的重要性。

       最初在出现这个问题时,是在触发器看到Utilization of poller data collector processes 超75%的报警。

    然后调出图形与日志检查,图形显示在Y轴时间的每个整点时候,数据会突然中断大概在2分钟后数据会显示100%然后回落至正常数值。如下图:

然后,查询zabbix-server的日志

tail /var/log/zabbix/zabbix_server.log 

       发现日志中的报错时间与图形中丢失数据的时间相吻合,这样猜想是由于这几项自动发现活动造成的报错,于是到网页中模板里把这几项发现先停掉了。再观察二个小时后,发现在停掉这几项发现活动后,虽然日志不再报错了。但图形部分每个整点依然会出现Utilization of poller data collector processes 值到达100%的情况

      于是,从网上找寻答案。了解到需要调

Zabbix服务器poller进程爆满?手把手教你调优StartPollers参数(附避坑指南) 本文针对Zabbix服务器poller进程利用率飙升告警问题,提供了一套深度调优实战方案。文章详细解析了poller进程的工作机制,并重点指导如何科学计算和调整StartPollers参数,避免盲目调参导致的资源耗尽或系统崩溃。同时,文中还分享了关联参数协同优化、实战案例及高级避坑指南,帮助运维人员从根本上解决数据采集瓶颈。 阅读详情

相关推荐

Optimizing Zabbix Server Performance: Tuning StartPollers for Poller Data Collector Efficiency

本文深入探讨了如何通过优化Zabbix Server的StartPollers参数来提升Poller数据收集器效率。文章从诊断Poller利用率告警入手,详细分析了关键性能指标,并提供了调整StartPollers及相关参数的实战指南,包括设置经验、专用Poller分流策略以及系统化性能优化思路,帮助运维人员有效解决数据收集瓶颈,确保监控系统稳定高效运行。

weixin_29207439的博客 349

Zabbix 进程占用75%优化.pdf

Zabbix服务器进程75%优化

zabbix问题解决

解决zabbix常见问题及问题处理方法 More than 100 items having missing data for more than 10 minutes

IC617多线程仿真卡死?手把手教你用TigerVNC替换解决ADE XL Explorer问题(附Manjaro/Centos8实测)

本文针对IC617在Manjaro、CentOS 8等高版本Linux系统中运行ADE XL Explorer进行多线程仿真时出现的卡死问题,提供了详细的诊断与解决方案。文章指出问题根源在于软件内置的旧版VNC组件不兼容,并手把手指导用户通过使用TigerVNC替换原组件来彻底解决,附有在Manjaro和CentOS 8系统上的实测步骤与验证方法。

hill8的博客 778

MacOS新手必看:HomeBrew安装避坑指南(含M1芯片适配方案)

本文为MacOS新手提供全面的HomeBrew安装指南,特别包含M1/M2芯片适配方案。从系统准备到核心安装流程,再到日常维护和高级配置,详细解析每个步骤的潜在问题及解决方案,帮助用户高效管理Mac软件。

weixin_28831399的博客 477

实现自动打包py及替换pyinstaller --add-data参数的方法

实现自动打包py及替换pyinstaller --add-data参数的方法

isS_MK_GmbH的博客 3471

Electron多窗口开发避坑指南:Pinia状态同步的3种解决方案对比

本文深入探讨了在Electron多窗口应用中实现Pinia状态同步的三种核心方案。针对Electron多窗口架构下状态隔离的挑战,文章对比了基础事件通信、共享存储以及智能Pinia插件等方案的优劣与适用场景,并提供了生产级的实现指南与选型建议,帮助开发者构建健壮高效的桌面应用。

spice的博客 481

uniapp - 实现手机端H5网页直播功能效果,拿到后端推流地址或播放资源后进行前端的流畅播放和画面展示功能,uniapp实时推流/拉流直播系统详细教程(提供完整示例代码,一键复制开箱即用!)

uniapp,h5网页,手机端H5网页,uniapp h5直播功能页面,uniapp直播实时推送显示,uniapp h5直播怎么做,怎么使用uniapp去实现移动端手机H5直播,h5 vue+uniapp怎么做直播,uniapp中使用videojs构建H5直播播放器,uniappH5端怎么实现直播推流,uniapp如何实现直播,直播聊天功能,h5平台端直播用什么插件,uniapp手机网页直播用什么组件插件播放器,uniapp手机H5直播播放器详细教程,直播项目,怎么使用vue+uniapp怎么做H5实时直播

✅ 精选推荐文章 8799

MIKE水动力笔记5_建立水动力模型

前文已经讲了如何制作网格文件(.mdf文件),这一博文就讲如何建立水动力模型。

晏长街的博客 3万+

Altium Designer 超详细入门教程

本文是一份Altium Designer新手入门教程,详细介绍了从软件基础到PCB制版的全流程。主要内容包括:软件界面介绍与工程创建方法;原理图设计中的元件放置、电气连线、标注添加等操作;PCB设计的布局布线、铺铜和DRC检查;Gerber和钻孔文件的导出方法。教程还提供了分类整理的实用快捷键表和新手避坑指南,强调原理图编译和DRC检查的重要性。通过本教程,新手可以快速掌握AD基本操作,完成简单电路板的设计与制版文件导出。

学习中...... 878

【23】C++实战篇——C++报错:LNK2001:无法解析的外部符号 ,LNK2019: 无法解析的外部符号,原因分析及解决方法

该文分析了VS项目中出现的"无法解析的外部符号"LNK2001/LNK2019错误。问题表现为跨项目共享变量时,Projector项目无法解析Line项目中声明的外部变量ImgSavePath和ImgFormat。原因在于头文件声明了变量但未包含实现的源文件。解决方法是将getLine.cpp文件添加到Projector项目中。文章还总结了两种错误代码的区别:LNK2001通常对应变量缺失,LNK2019对应函数缺失。最后列出了具体的报错信息,包括无法解析的变量和函数符号。

程序员,他们想的是什么?他们想的永远都是技术,他们崇尚的也永远都是技术。 2016

lwip-2.0.3

lwip是瑞典计算机科学院(SICS)的Adam Dunkels 开发的一个小型开源的TCP/IP协议栈。实现的重点是在保持TCP协议主要功能的基础上减少对RAM 的占用。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

IMSL CNL 7.0.0 (x86-64)Crack

IMSL CNL 7.0.0 (x86-64)Crack intel的算法库破解文件,这是C++版本的破解文件

上一篇: VMWARE安装的LINUX系统时间与实际时间差8个小时
edisonluy
博客等级 码龄4年 2粉丝 2原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值
⌂ 换网址